The LMx39-N series consists of four independent precision voltage comparators with an offset voltage specification as low as 2 mV maximum for all four comparators. These comparators were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. These comparators also have a unique characteristic in that the input common-mode voltage range includes ground, even though they are operated from a single power supply voltage.

The LMx39-N series was designed to directly interface with TTL and CMOS. When operated from both plus and minus power supplies, the devices directly interface with MOS logic – where the low power drain of the LM339 is a distinct advantage over standard comparators.

• Wide Supply Voltage Range
• LM139/139A Series 2 to 36 VDC or ±1 to ±18 VDC
• LM2901-N: 2 to 36 VDC or ±1 to ±18 VDC
• LM3302-N: 2 to 28 VDC or ±1 to ±14 VDC
• Very Low Supply Current Drain (0.8 mA) – Independent of Supply Voltage
• Low Input Biasing Current: 25 nA
• Low Input Offset Current: ±5 nA
• Offset Voltage: ±3 mV
• Input Common-Mode Voltage Range Includes GND
• Differential Input Voltage Range Equal to the Power Supply Voltage
• Low Output Saturation Voltage: 250 mV at 4 mA
• Output Voltage Compatible With TTL, DTL, ECL, MOS, and CMOS Logic Systems
• Advantages:
  • High-Precision Comparators
  • Reduced VOS Drift Overtemperature
  • Eliminates Need for Dual Supplies
  • Allows Sensing Near GND
  • Compatible With All Forms of Logic
  • Power Drain Suitable for Battery Operation

• Number of channels (#)
• 4
• Output type
• Open-collector, Open-drain
• Propagation delay time (μs)
• 1.3
• Vs (Max) (V)
• 36
• Vs (Min) (V)
• 2
• Vos (offset voltage @ 25 C) (Max) (mV)
• 5
• Iq per channel (Typ) (mA)
• 0.2
• Input bias current (+/-) (Max) (nA)
• 250
• Rail-to-rail
• Out
• Rating
• Military
• Operating temperature range (C)
• -25 to 85
• Features
• —
• VICR (Max) (V)
• 34
• VICR (Min) (V)
• 0

LM239-N的完整型号有：LM239J，以下是这些产品的关键参数及官网采购报价：

LM239J，工作温度：-25 to 85，封装：CDIP (J)-14，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：Level-1-NA-UNLIM，引脚镀层/焊球材料：SNPB，TI官网LM239J的批量USD价格：7.436（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)