- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:直流/直流开关稳压器 - 降压稳压器
- 功能描述:具有上电/断电跟踪功能的 42V、次级侧后置稳压器/同步降压控制器
- 点击这里打开及下载LM25115A的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The LM25115A controller contains all of the features necessary to produce multiple tracking outputs using the Secondary Side Post Regulation (SSPR) technique. The SSPR technique develops a highly efficient and well regulated auxiliary output from the secondary side switching waveform of an isolated power converter. LM25115A can be also used as a standalone DC/DC synchronous buck controller (Refer to section). Regulation of the auxiliary output voltage is achieved by leading edge pulse width modulation (PWM) of the main channel duty cycle. Leading edge modulation is compatible with either current mode or voltage mode control of the main output. The LM25115A drives external high-side and low-side NMOS power switches configured as a synchronous buck regulator. A current sense amplifier provides overload protection and operates over a wide common mode input range. Additional features include a low dropout (LDO) bias regulator, error amplifier, precision reference, adaptive dead time control of the gate signals and thermal shutdown.
- Power-up/Power-down Tracking
- Self-synchronization to Main Channel Output
- Leading Edge Pulse Width Modulation
- Valley Current Mode Control
- Standalone DC/DC Synchronous Buck Mode
- Operates from AC or DC Input up to 42V
- Wide 4.5V to 30V Bias Supply Range
- Wide 0.75V to 13.5V Output Range.
- Top and Bottom Gate Drivers Sink 2.5A Peak
- Adaptive Gate Driver Dead-time Control
- Wide Bandwidth Error Amplifier (4MHz)
- Programmable Soft-start
- Thermal Shutdown Protection
- TSSOP-16 package
All trademarks are the property of their respective owners.
- Vin (Min) (V)
- 4.5
- Vin (Max) (V)
- 42
- Vout (Min) (V)
- 0.75
- Vout (Max) (V)
- 13.5
- Switching frequency (Min) (kHz)
- 1000
- Switching frequency (Max) (kHz)
- 1000
- Features
- Frequency Synchronization
- Regulated outputs (#)
- 1
- Number of phases
- 1
- Rating
- Catalog
LM25115A的完整型号有:LM25115AMT/NOPB、LM25115AMTX/NOPB,以下是这些产品的关键参数及官网采购报价:
LM25115AMT/NOPB,工作温度:-40 to 125,封装:TSSOP (PW)-16,包装数量MPQ:92个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LM25115AMT/NOPB的批量USD价格:1.278(1000+)
LM25115AMTX/NOPB,工作温度:-40 to 125,封装:TSSOP (PW)-16,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LM25115AMTX/NOPB的批量USD价格:1.065(1000+)
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)