The LM2575 device greatly simplifies the design of switching power supplies by conveniently providing all the active functions needed for a step-down (buck) switching regulator in an integrated circuit. Accepting a wide input voltage range and available in an adjustable output version, the LM2575 has an integrated switch capable of delivering 1 A of load current, with excellent line and load regulation. The device also offers internal frequency compensation, a fixed-frequency oscillator, cycle-by-cycle current limiting, and thermal shutdown. In addition, a manual shutdown is available through an external ON/OFF pin.

The LM2575 represents a superior alternative to popular three-terminal linear regulators. Due to its high efficiency, it significantly reduces the size of the heat sink and, in many cases, no heat sink is required. Optimized for use with standard series of inductors available from several different manufacturers, the LM2575 greatly simplifies the design of switch-mode power supplies by requiring a minimal addition of only four to six external components for operation.

The LM2575 is characterized for operation over the virtual junction temperature range of –40°C to 125°C.

• Adjustable With a Range of 1.23 V to 37 V and ±4% Regulation (Max) Over Line, Load, and Temperature Conditions
• Specified 1-A Output Current
• Wide Input Voltage Range 4.75 V to 40 V
• Uses Readily Available Standard Inductors
• 52-kHz (Typical) Fixed-Frequency Internal Oscillator
• TTL Shutdown Capability With 50-μA (Typical) Standby Current
• High Efficiency…as High as 88% (Typical)
• Thermal Shutdown and Current-Limit Protection With Cycle-by-Cycle Current Limiting
• For the Full Offering of Voltages (Including Fixed- Output Options) and Packages (Including TO- 263), See TL2575 Data Sheet, SLVS638

• Vin (Min) (V)
• 4.75
• Vin (Max) (V)
• 40
• Vout (Min) (V)
• 1.23
• Vout (Max) (V)
• 37
• Iout (Max) (A)
• 1
• Iq (Typ) (uA)
• 5000
• Switching frequency (Min) (kHz)
• 47
• Switching frequency (Max) (kHz)
• 58
• Features
• Enable, Over Current Protection
• Rating
• Catalog
• Regulated outputs (#)
• 1
• Control mode
• Voltage Mode
• Duty cycle (Max) (%)
• 98

LM2575的完整型号有：LM2575IN，以下是这些产品的关键参数及官网采购报价：

LM2575IN，工作温度：-40 to 125，封装：PDIP (N)-16，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：NIPDAU，TI官网LM2575IN的批量USD价格：0.751（1000+）

LM2575 Unencrypted PSpice Transient Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

SWITCHERSMADESIMPLE-SW — Switchers Made Simple

Note: The Switchers Made Simple design computations have been incorporated into Texas Instruments' award winning WEBENCH Power Designer Online Design Tool. Please use TI's WEBENCH Power Designer online tools for new designs. The WEBENCH Design Tool also includes:

• Visual design optimization for (...)