The LM26001B is a switching regulator designed for the high efficiency requirements of applications with stand-by modes. The device features a low-current sleep mode to maintain efficiency under light-load conditions and current-mode control for accurate regulation over a wide input voltage range. Quiescent current is reduced to 10 µA typically in shutdown mode and less than 40 µA in sleep mode. Forced PWM mode is also available to disable sleep mode.

The LM26001B can deliver up to 1.5A of continuous load current with a fixed current limit, through the internal N-channel switch. The part has a wide input voltage range of 4.0V to 18V and can operate with input voltages as low as 3V during line transients.

Operating frequency is adjustable from 150 kHz to 500 kHz with a single resistor and can be synchronized to an external clock.

Other features include Power good, adjustable soft-start, enable pin, input under-voltage protection, and an internal bootstrap diode for reduced component count.

• High Efficiency Sleep Mode
• 40 μA Typical Iq in Sleep Mode
• 10 μA Typical Iq in Shutdown Mode
• 3.0V Minimum Input Voltage
• 4.0V to 18V Continuous Input Range
• 2.0% Reference Accuracy
• Cycle-by-Cycle Current Limit
• Adjustable Frequency (150 kHz to 500 kHz)
• Synchronizable to an External Clock
• Power Good Flag
• Forced PWM Function
• Adjustable Soft-Start
• HTSSOP-16 Exposed Pad Package
• Thermal Shut Down

All trademarks are the property of their respective owners.

• Vin (Min) (V)
• 3
• Vin (Max) (V)
• 18
• Vout (Min) (V)
• 1.25
• Vout (Max) (V)
• 16
• Iout (Max) (A)
• 1.5
• Iq (Typ) (uA)
• 38
• Switching frequency (Min) (kHz)
• 150
• Switching frequency (Max) (kHz)
• 500
• Features
• Enable, Light Load Efficiency, Power Good, Pre-Bias Start-Up
• Rating
• Catalog
• Regulated outputs (#)
• 1
• Control mode
• Current Mode
• Duty cycle (Max) (%)
• 98

LM26001B的完整型号有：LM26001BMH/NOPB、LM26001BMHX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM26001BMH/NOPB，工作温度：-40 to 125，封装：HTSSOP (PWP)-16，包装数量MPQ：92个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：Call TI，TI官网LM26001BMH/NOPB的批量USD价格：.792（1000+）

LM26001BMHX/NOPB，工作温度：-40 to 125，封装：HTSSOP (PWP)-16，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM26001BMHX/NOPB的批量USD价格：.66（1000+）

LM26001B PSpice Average Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)