The LM2621 is a high efficiency, step-up DC-DC switching regulator for battery-powered and low input voltage systems. It accepts an input voltage between 1.2 V and 14 V and converts it into a regulated output voltage. The output voltage can be adjusted between 1.24 V and 14 V. It has an internal 0.17-Ω N-Channel MOSFET power switch. Efficiencies up to 90% are achievable using the LM2621.

The high switching frequency (adjustable up to 2 MHz) of the LM2621 allows for tiny surface mount inductors and capacitors. Because of the unique constant-duty-cycle gated oscillator topology very high efficiencies are realized over a wide load range. The supply current is reduced to 80 µA because of the BiCMOS process technology. In the shutdown mode, the supply current is less than 2.5 µA.

The LM2621 is available in a VSSOP-8 package. This package uses half the board area of a standard 8-pin SOIC and has a height of just 1.09 mm.

• Small VSSOP8 Package (Half the Footprint of Standard 8-Pin SOIC Package)
• 1.09-mm Package Height
• Up to 2-MHz Switching Frequency
• 1.2-V to 14-V Input Voltage
• 1.24-V to 14-V Adjustable Output Voltage
• Up to 1A Load Current
• 0.17-Ω Internal MOSFET
• Up to 90% Regulator Efficiency
• 80-μA Typical Operating Current
• < 2.5-μA Specified Supply Current In Shutdown

• Vin (Min) (V)
• 1.2
• Vin (Max) (V)
• 14
• Vout (Min) (V)
• 1.24
• Vout (Max) (V)
• 14
• Switch current limit (Typ) (A)
• 2.85
• Regulated outputs (#)
• 1
• Switching frequency (Min) (kHz)
• 2000
• Switching frequency (Max) (kHz)
• 2000
• Iq (Typ) (mA)
• 0.08
• Features
• Enable
• Duty cycle (Max) (%)
• 80
• Rating
• Catalog

LM2621的完整型号有：LM2621MM/NOPB、LM2621MMX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM2621MM/NOPB，工作温度：-40 to 85，封装：VSSOP (DGK)-8，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM2621MM/NOPB的批量USD价格：.933（1000+）

LM2621MMX/NOPB，工作温度：-40 to 85，封装：VSSOP (DGK)-8，包装数量MPQ：3500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM2621MMX/NOPB的批量USD价格：.783（1000+）

LM2621EVAL — 低输入电压，升压 DC-DC 评估模块

Low Input Voltage, Step-Up DC-DC

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

FLYBUCK-FLYBACK-DESIGN-CALC — Fly-Buck 和反激式拓扑选择器

该工具可帮助电源工程师基于规格选择正确的隔离式直流-直流拓扑。根据所选择的拓扑，计算器还会针对设计建议正确的 IC。