The LM2650 is a step-down DC/DC converter featuring high efficiency over a 3A to milliamperes load range. This feature makes the LM2650 an ideal fit in battery-powered applications that demand long battery life in both run and standby modes.

The LM2650 also features a logic-controlled shutdown mode in which it draws at most 25μA from the input power supply.

The LM2650 employs a fixed-frequency pulse-width modulation (PWM) and synchronous rectification to achieve very high efficiencies. In many applications, efficiencies reach 95%+ for loads around 1A and exceed 90% for moderate to heavy loads from 0.2A to 2A.

A low-power hysteretic or "sleep" mode keeps efficiencies high at light loads. The LM2650 enters and exits sleep mode automatically as the load crosses "sleep in" and "sleep out" thresholds. The LM2650 provides nodes for programming both thresholds via external resistors. A logic input allows the user to override the automatic sleep feature and keep the LM2650 in PWM mode regardless of the load level.

An optional soft-start feature limits current surges from the input power supply at start up and provides a simple means of sequencing multiple power supplies.

• Ultra High Efficiencies (95% possible)
• High Efficiency Over a 3A to Milliamperes Load Range
• Synchronous Switching of Internal NMOS Power FETs
• Wide Input Voltage Range (4.5V to 18V)
• Output Voltage Adjustable from 1.5V to 16V
• Automatic Low-Power Sleep Mode
• Logic-Controlled Micropower Shutdown (IQSD ≤ 25 μA)
• Frequency Adjustable up to 300 kHz
• Frequency Synchronization with External Signal
• Programmable Soft-Start
• Short-Circuit Current Limiting
• Thermal Shutdown
• Available in 24-lead Small-Outline Package

• Vin (Min) (V)
• 4.5
• Vin (Max) (V)
• 18
• Vout (Min) (V)
• 1.5
• Vout (Max) (V)
• 16
• Iout (Max) (A)
• 3
• Iq (Typ) (uA)
• 4000
• Switching frequency (Min) (kHz)
• 75
• Switching frequency (Max) (kHz)
• 105
• Features
• Frequency Synchronization
• Rating
• Catalog
• Regulated outputs (#)
• 1
• Control mode
• Voltage Mode
• Duty cycle (Max) (%)
• 97

LM2650的完整型号有：LM2650M-ADJ/NOPB、LM2650MX-ADJ/NOPB，以下是这些产品的关键参数及官网采购报价：

LM2650M-ADJ/NOPB，工作温度：-40 to 125，封装：SOIC (DW)-24，包装数量MPQ：30个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LM2650M-ADJ/NOPB的批量USD价格：4.346（1000+）

LM2650MX-ADJ/NOPB，工作温度：-40 to 125，封装：SOIC (DW)-24，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LM2650MX-ADJ/NOPB的批量USD价格：3.677（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)