The LM2750 is a regulated switched-capacitor doubler that produces a low-noise output voltage. The 5-V output voltage option (LM2750-5.0) can supply up to 120 mA of output current over a 2.9-V to 5.6-V input range, as well as up to 40 mA of output current when the input voltage is as low as 2.7 V. An adjustable output voltage option with similar output current capabilities is also available (LM2750-ADJ). The LM2750 has been placed in TI's 10-pin WSON, a package with excellent thermal properties that keeps the part from overheating under almost all rated operating conditions.

A perfect fit for space-constrained, battery-powered applications, the LM2750 requires only three external components: one input capacitor, one output capacitor, and one flying capacitor. Small, inexpensive ceramic capacitors are recommended for use. In conjunction with the
1.7-MHz fixed switching frequency of the LM2750, these capacitors yield low output-voltage ripple, which is beneficial for systems requiring a low-noise supply. Pre-regulation minimizes input current ripple, thus reducing input noise to negligible levels.

A tightly controlled soft-start feature limits inrush currents during part activation. Shutdown completely disconnects the load from the input. Output current limiting and thermal shutdown circuitry protect both the LM2750 and other connected devices in the event of output shorts or excessive current loads.

For all available packages, see the orderable addendum at the end of the data sheet.

• Wide Input Voltage Range: 2.7 V to 5.6 V
• Inductorless Solution: Application Requires Only Three Small Ceramic Capacitors
• Fixed 5-V Output and Adjustable Output Voltage Options Available
• 85% Peak Efficiency
  • 70% Average Efficiency Over Li-Ion Input Range (2.9 V to 4.2 V)
• Output Current up to 120 mA With 2.9 V ≤ VIN ≤ 5.6 V
  • Output Current up to 40 mA With 2.7 V ≤ VIN ≤ 2.9 V
• Fixed 1.7-MHz Switching Frequency for a Low-Noise, Low-Ripple Output Signal
• Pre-Regulation Minimizes Input Current Ripple, Keeping the Battery Line (VIN) Virtually Noise-Free
• Shutdown Supply Current Less Than 2 μA
• Tiny WSON Package With Outstanding Power Dissipation: Usually No Derating Required

• Vin (Min) (V)
• 2.7
• Vin (Max) (V)
• 5.6
• Vout (Min) (V)
• 5
• Vout (Max) (V)
• 5
• Iout (Max) (A)
• 0.12
• Regulated outputs (#)
• 1
• Switching frequency (Min) (kHz)
• 1000
• Switching frequency (Max) (kHz)
• 1700
• Iq (Typ) (mA)
• 5
• Features
• Enable
• Rating
• Catalog

LM2750的完整型号有：LM2750LD-5.0/NOPB、LM2750LD-ADJ/NOPB、LM2750LDX-5.0/NOPB、LM2750SD-5.0/NOPB、LM2750SD-ADJ/NOPB、LM2750SDX-5.0/NOPB、LM2750SDX-ADJ/NOPB，以下是这些产品的关键参数及官网采购报价：

LM2750LD-5.0/NOPB，工作温度：-40 to 85，封装：WSON (NGY)-10，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LM2750LD-5.0/NOPB的批量USD价格：.767（1000+）

LM2750LD-ADJ/NOPB，工作温度：-40 to 85，封装：WSON (NGY)-10，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LM2750LD-ADJ/NOPB的批量USD价格：.639（1000+）

LM2750LDX-5.0/NOPB，工作温度：-40 to 85，封装：WSON (NGY)-10，包装数量MPQ：4500个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LM2750LDX-5.0/NOPB的批量USD价格：.639（1000+）

LM2750SD-5.0/NOPB，工作温度：-40 to 85，封装：WSON (DSC)-10，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM2750SD-5.0/NOPB的批量USD价格：.767（1000+）

LM2750SD-ADJ/NOPB，工作温度：-40 to 85，封装：WSON (DSC)-10，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM2750SD-ADJ/NOPB的批量USD价格：.767（1000+）

LM2750SDX-5.0/NOPB，工作温度：PropertyValue，封装：WSON (DSC)-10，包装数量MPQ：4500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM2750SDX-5.0/NOPB的批量USD价格：.639（1000+）

LM2750SDX-ADJ/NOPB，工作温度：-40 to 85，封装：WSON (DSC)-10，包装数量MPQ：4500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM2750SDX-ADJ/NOPB的批量USD价格：.639（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)