The LM2755 is a charge-pump-based, constant current LED driver capable of driving 3 LEDs with a total output current up to 90mA. The diode current waveforms of each LED can be trapezoidal with timing and level parameters (rise time, fall time, high level, low level, delay, high time, low time) programmed via an I²C-compatible interface. The 32 brightness levels found on the LM2755 are exponentially spaced (as opposed to linearly spaced) to better match the response of the human eye to changing brightness levels.

The device requires only four small and low-cost ceramic capacitors. The LM2755 provides excellent efficiency without the use of an inductor by operating the charge pump in a gain of 3/2 or in a gain of 1. Maximum efficiency is achieved over the input voltage range by actively selecting the proper gain based on the LED forward voltage requirements.

The pre-regulation scheme used by the LM2755 is optimized to ensure low conducted noise on the input. An internal soft-start circuitry eliminates high inrush current at start-up. The LM2755 consumes 3µA (typ.) of supply current in shut-down.

The LM2755 is available in Texas Instruments' tiny 18-bump thin DSBGA package.

• 90% Peak Efficiency
• Total solution size < 13mm2
• No Inductor Required: Only 4 Inexpensive Ceramic Caps
• 3 Independently Controlled Constant Current Outputs
• Programmable Trapezoidal Dimming Waveform on Each Output
• Programmable Timing Control Via Internal Registers and External Clock Synchronization Input
• 32 Exponential Dimming Steps with 800:1 Dimming Ratio
• Programmable Brightness Control via I2C-Compatible Interface
• Hardware Enable Pin
• Wide Input Voltage Range: 2.7V to 5.5V
• Tiny 18-bump Thin DSBGA : 1.8mm x 1.6mm x 0.6mm

All trademarks are the property of their respective owners.

• Number of channels (#)
• 3
• LED current per channel (mA)
• 25
• LED configuration
• Parallel
• Program memory
• No
• Programmable ramp control
• Yes
• Vin (Min) (V)
• 2.7
• Vin (Max) (V)
• 5.5
• Iout (Max) (A)
• 0.09
• Features
• Constant current, Current control, I2C control, Programmable lighting engines
• Iq (Typ) (mA)
• 1
• Shutdown current (Typ) (uA)
• 5
• Operating temperature range (C)
• -30 to 85
• Rating
• Catalog

LM2755的完整型号有：LM2755TM/NOPB、LM2755TMX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM2755TM/NOPB，工作温度：-30 to 85，封装：DSBGA (YFQ)-18，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网LM2755TM/NOPB的批量USD价格：.595（1000+）

LM2755TMX/NOPB，工作温度：-30 to 85，封装：DSBGA (YFQ)-18，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网LM2755TMX/NOPB的批量USD价格：.496（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)