The LM27965 is a highly integrated charge-pump-based dual-display LED driver. The device can drive up to 9 LEDs in parallel with a total output current of 180mA. Regulated internal current sinks deliver excellent current and brightness matching in all LEDs.

The LED driver current sinks are split into three independently controlled groups. The primary group can beconfigurabled with 4 or 5 LEDs, for backlighting a larger main display and the second group can be configured with 2 or 3 LEDs, for backlighing a smaller secondary display. An additional, independently controlled led driver is provided for driving an indicator or general purpose LED. The LM27965 has an I²C compatible interface that allows the user to independently control the brightness on each bank of LEDs.

The device provides excellent efficiency without the use of an inductor by operating the charge pump in a gain of 3/2, or in Pass-Mode. The proper gain for maintaining current regulation is chosen based on LED forward voltage, so that efficiency is maximized over the input voltage range.

The LM27965 is available in a small 24-pin WQFN-24 package.

• 91% Peak LED Drive Efficiency
• No Inductor Required
• 0.3% Current Matching
• Drives LEDs with up to 30mA per LED
• 180mA of total drive current
• I2C Compatible Brightness Control Interface
• Adaptive 1× - 3/2× Charge Pump
• Resistor-Programmable Current Settings
• External Chip RESET Pin
• Extended Li-Ion Input: 2.7V to 5.5V
• Small low profile industry standard leadless package, WQFN 24 : (4mm x 4mm x 0.8mm)
• 25mm2 total solution size
• Two I2C Compatible Chip Address Options: 0x36 for LM27965SQ and 0x38 for LM27965SQ-M

• Number of channels (#)
• 8
• Vin (Min) (V)
• 2.7
• Vin (Max) (V)
• 5.5
• Vout (Min) (V)
• 2.7
• Vout (Max) (V)
• 5.5
• Type
• Capacitive
• Switching frequency (Max) (kHz)
• 1570
• LED current per channel (mA)
• 30
• Peak efficiency (%)
• 91
• Topology
• Buck
• Features
• I2C Control
• Operating temperature range (C)
• -30 to 85

LM27965的完整型号有：LM27965SQ-M/NOPB、LM27965SQ/NOPB、LM27965SQX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM27965SQ-M/NOPB，工作温度：PropertyValue，封装：WQFN (RTW)-24，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM27965SQ-M/NOPB的批量USD价格：.99（1000+）

LM27965SQ/NOPB，工作温度：-30 to 85，封装：WQFN (RTW)-24，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM27965SQ/NOPB的批量USD价格：1.188（1000+）

LM27965SQX/NOPB，工作温度：-30 to 85，封装：WQFN (RTW)-24，包装数量MPQ：4500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM27965SQX/NOPB的批量USD价格：.99（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)