The LM3253 is a DC-DC converter optimized for powering multi-mode 2G/3G/4G RF power amplifiers (PAs) from a single Lithium-Ion cell. The LM3253 steps down an input voltage from 2.7V to 5.5V to a dynamically adjustable output voltage of 0.4V to 3.6V. The output voltage is set through a VCON analog input that adjusts the output voltage to ensure efficient operation at all power levels of the RF PA. The LM3253 is optimized for USB datacard applications.

The LM3253 operates in constant frequency Pulse Width Modulation (PWM) mode producing a small and predictable amount of output voltage ripple. This enables best ECTEL power requirements in GMSK and EDGE spectral compliance, with the minimal amount of filtering and excess headroom. When operating in Pulse Frequency Modulation (PFM) mode, the LM3253 enables the lowest DG09 current consumption and therefore maximizes system efficiency.

The LM3253 has a unique Active Current assist and analog Bypass (ACB) feature to minimize inductor size without any loss of output regulation for the entire battery voltage and RF output power range, until dropout. ACB provides a parallel current path, when needed, to limit the maximum inductor current to 1.84A (typ.) while still driving a 3A load. The ACB also enables operation with minimal dropout voltage. The LM3253 is available in a small 2 mm x 2 mm chip-scale 16-bump DSBGA package.

When considering the use of the LM3253 in a system design, contact the Texas Instruments Sales or Field Application engineer for a copy of the "LM3253: DC-DC Converter for 3G/4G RF PAs PCB Layout Considerations.”

• High-Efficiency PFM and PWM Modes with Internal Synchronous Rectification
• Analog Bypass Function with Low Dropout Resistance (45 mΩ typ.)
• Dynamically Adjustable Output Voltage, 0.4V to 3.6V (typ.), in PFM and PWM modes
• 3A Maximum Load Current in PWM Mode
• 2.7MHz (average) PWM Switching Frequency
• Modulated Switching Frequency to Aid Rx Band Compliance
• Operates From a Single Li-ion Cell (2.7V to 5.5V)
• ACB Reduces Inductor Requirements and Size
• Minimum Total Solution Size by Using Small Footprint and Case Size Inductor and Capacitors
• 16-bump Thin DSBGA Package
• Current and Thermal Overload Protection

• Vin (Min) (V)
• 2.7
• Vin (Max) (V)
• 5.5
• Vout (Min) (V)
• 0.4
• Vout (Max) (V)
• 3.6
• Iout (Max) (A)
• 3
• Iq (Typ) (uA)
• 260
• Switching frequency (Min) (kHz)
• 2430
• Switching frequency (Max) (kHz)
• 2970
• Features
• Fixed Output
• Rating
• Catalog
• Regulated outputs (#)
• 1
• Control mode
• Voltage Mode
• Duty cycle (Max) (%)
• 100

LM3253-C的完整型号有：LM3253TMX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM3253TMX/NOPB，工作温度：-30 to 90，封装：DSBGA (YFQ)-16，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网LM3253TMX/NOPB的批量USD价格：.833（1000+）

LM3253EVM — 用于 LM3253 的评估板

The LM3253 is a DC-DC converter optimized for powering multi-mode 2G/3G/4G RF power amplifiers (PAs) from a single Lithium-Ion cell. The LM3253 steps down an input voltage from 2.7V to 5.5V to a dynamically adjustable output voltage of 0.4V to 3.6V. The output voltage is set through a VCON analog (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)