The LM3409, LM3409-Q1, LM3409HV, and LM3409HV-Q1 are P-channel MOSFET (PFET) controllersfor step-down (buck) current regulators. They offer wide input voltage range, high-sidedifferential current sense with low adjustable threshold voltage and fast output enable/disablefunction and a thermally enhanced 10-pin, HVSSOP package. These features combine to make the LM3409 family of devices ideal for use as constant current sources for driving LEDs where forward currentsup to 5 A are easily achievable.

The LM3409 devices use constant off-time (COFT) control to regulate an accurate constantcurrent without the need for external control loop compensation. Analog and PWM dimming are easy toimplement and result in a highly linear dimming range with excellent achievable contrast ratios. Programmable UVLO, low-power shutdown, and thermal shutdown complete the feature set.

For all available packages, see the orderable addendum at the end of the data sheet.

• LM3409-Q1 and LM3409HV-Q1 are Automotive Grade Products: AEC-Q100 Grade 1 Qualified
• 2-?, 1-A Peak MOSFET Gate Drive
• VIN Range: 6 V to 42 V (LM3409, LM3409-Q1)
• VIN Range: 6 V to 75 V (LM3409HV, LM3409HV-Q1)
• Differential, High-Side Current Sense
• Cycle-by-Cycle Current Limit
• No Control Loop Compensation Required
• 10,000:1 PWM Dimming Range
• 250:1 Analog Dimming Range
• Supports All-Ceramic Output Capacitors and Capacitor-less Outputs
• Low-Power Shutdown and Thermal Shutdown
• Thermally Enhanced 10-Pin, HVSSOP Package

• Input voltage (type)
• DC/DC
• Topology
• Buck
• Vin (Min) (V)
• 6
• Vin (Max) (V)
• 42
• Iout (Max) (A)
• 5
• Iq (Typ) (mA)
• 2
• Features
• Adjustable Switch Frequency, Enable/Shutdown, Precision Dimming Control, Thermal Shutdown
• Operating temperature range (C)
• -40 to 125
• Dimming method
• Analog, PWM

LM3409的完整型号有：LM3409MY/NOPB、LM3409MYX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM3409MY/NOPB，工作温度：-40 to 125，封装：HVSSOP (DGQ)-10，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LM3409MY/NOPB的批量USD价格：.624（1000+）

LM3409MYX/NOPB，工作温度：-40 to 125，封装：HVSSOP (DGQ)-10，包装数量MPQ：3500个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LM3409MYX/NOPB的批量USD价格：.52（1000+）

LM3409EVAL — LM3409 演示板

This demonstration board showcases the LM3409 PFET controller for a buck current regulator. It is designed to drive 4 LEDs (VO = 15V) at a maximum average LED current (ILED = 1A) from a DC input voltage (VIN = 24V). The switching frequency (fSW = 525 kHz) is targeted for the nominal operating (...)

LM3409 PSpice Transient Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TIDA-01415 — 100W、高分辨率、16 位颜色可调、0.15% 可调光 RGBW LED 灯具参考设计

This reference design demonstrates the finest range of color control of individual RGBW LED strings with > 16 bits of PWM resolution while supporting the PWM modulation frequencies as high as 30 and 50 kHz. This reference design demonstrates the finest range of individual RGBW LED strings color (...)

PMP6024 — 100-240VAC 输入、60W、双串 PWM 可调光 LED 驱动器参考设计

PMP6024 是一种离线 LED 驱动器电路，包含一个隔离式功率因素校正恒定输出电压反激式转换器，随后是两个直流/直流降压 LED 电流控制器。它适用于 3500-5000 流明（取决于 LED 选择）的室内或室外区域照明应用。LED 亮度由 3.3V 10kHz PWM 信号控制，此信号转换为 LED 灯串电流的直流电平调整值，从而避免对光输出进行 PWM 调制。

PMP8531 — 基于 LED 驱动器的通用限流器

该设计是基于 LED 驱动器的限流器。它可以用于各种应用，并可以方便地更改为不同的电流限制。PMP8531 使用 LM3409 降压控制器。Excel 电子表格显示两种不同的配置（电流源或电气保险丝），帮助设计人员快速获得有效的设计。