The LM3409, LM3409-Q1, LM3409HV, and LM3409HV-Q1 are P-channel MOSFET (PFET) controllersfor step-down (buck) current regulators. They offer wide input voltage range, high-sidedifferential current sense with low adjustable threshold voltage and fast output enable/disablefunction and a thermally enhanced 10-pin, HVSSOP package. These features combine to make the LM3409 family of devices ideal for use as constant current sources for driving LEDs where forward currentsup to 5 A are easily achievable.

The LM3409 devices use constant off-time (COFT) control to regulate an accurate constantcurrent without the need for external control loop compensation. Analog and PWM dimming are easy toimplement and result in a highly linear dimming range with excellent achievable contrast ratios. Programmable UVLO, low-power shutdown, and thermal shutdown complete the feature set.

For all available packages, see the orderable addendum at the end of the data sheet.

• LM3409-Q1 and LM3409HV-Q1 are Automotive Grade Products: AEC-Q100 Grade 1 Qualified
• 2-?, 1-A Peak MOSFET Gate Drive
• VIN Range: 6 V to 42 V (LM3409, LM3409-Q1)
• VIN Range: 6 V to 75 V (LM3409HV, LM3409HV-Q1)
• Differential, High-Side Current Sense
• Cycle-by-Cycle Current Limit
• No Control Loop Compensation Required
• 10,000:1 PWM Dimming Range
• 250:1 Analog Dimming Range
• Supports All-Ceramic Output Capacitors and Capacitor-less Outputs
• Low-Power Shutdown and Thermal Shutdown
• Thermally Enhanced 10-Pin, HVSSOP Package

• Topology
• Buck
• Vin (Min) (V)
• 6
• Vin (Max) (V)
• 75
• Iout (Max) (A)
• 5
• Iq (Typ) (mA)
• 2
• Operating temperature range (C)
• -40 to 125
• Dimming method
• Analog, PWM

LM3409HV的完整型号有：LM3409HVMY/NOPB、LM3409HVMYX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM3409HVMY/NOPB，工作温度：-40 to 125，封装：HVSSOP (DGQ)-10，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LM3409HVMY/NOPB的批量USD价格：.686（1000+）

LM3409HVMYX/NOPB，工作温度：-40 to 125，封装：HVSSOP (DGQ)-10，包装数量MPQ：3500个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LM3409HVMYX/NOPB的批量USD价格：.572（1000+）

LM3409HVEVAL — LM3409HV 高电压 LED 降压控制器评估板

This evaluation board showcases the LM3409HV PFET controller for a buck current regulator. It is designed to drive 12 LEDs (VO = 42V) at a maximum average LED current (ILED = 1.5A) from a DC input voltage (VIN = 48V). The switching frequency (fSW = 400 kHz) is targeted for the nominal operating (...)

TPS2372-3EVM-757 — 适用于照明应用的 TPS2372-3 IEEE802.3bt 3 类 PoE PD 评估模块

TPS2372-3EVM-757 评估模块包含 TPS2372 的设计和基准电路，后者是一款适用于高功率 PoE PD 照明应用的 IEEE802.3bt 3 类 PoE PD 控制器。

TPS2372-4EVM-006 — 适用于 IEEE802.3bt PoE PD 应用的 TPS2372-4EVM 评估模块

The TPS2372 evaluation module (TPS2372-4EVM-006) contains evaluation and reference circuitry for the TPS2372, which is a IEEE802.3bt PoE PD controller suitable for high power PoE PD applications such as LED lighting and modules.

In need of an IEEE802.3bt-ready PSE controller? Check out the TPS23880.

LM3409-Q1 PSpice Transient Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TIDA-01463 — 支持 IEEE802.3bt 以太网供电 (PoE) 的互联 LED 照明参考设计

此以太网供电 (PoE) 参考设计可通过一条以太网电缆向互联 LED 照明镇流器传输电力和数据。此参考设计采用了 TI 的 TPS2372-4 PoE 供电设备 (PD) 接口、LM3409 降压控制器、LM5165 降压转换器、TPS62740 降压转换器、TM4C1292NCPDT 微控制器 (MCU)、TPD4E05U06-Q1 ESD 保护器件和 DP83822I 以太网 PHY 为 LED 灯提供电源，在连接到网络的情况下通过远程方式控制 LED 灯的亮度和调光参数。