The LM3431 is a 3-channel linear current controller combined with a boost switching controller ideal for driving LED backlight panels in space critical applications. The LM3431 drives 3 external NPN transistors or MOSFETs to deliver high accuracy constant current to 3 LED strings. Output current is adjustable to drive strings in excess of 200 mA. The LM3431 can be expanded to drive as many as 6 LED strings.

The boost controller drives an external NFET switch for step-up regulation from input voltages between 5V and 36V. The LM3431 features LED cathode feedback to minimize regulator headroom and optimize efficiency.

A DIM input pin controls LED brightness from analog or digital control signals. Dimming frequencies up to 25 kHz are possible with a contrast ratio of 100:1. Contrast ratios greater than 1000:1 are possible at lower dimming frequencies.

The LM3431 eliminates audible noise problems by maintaining constant output voltage regulation during LED dimming. Additional features include LED short and open protection, fault delay/error flag, cycle by cycle current limit, and thermal shutdown for both the IC and LED array. The enhanced LM3431A features reduced offset voltage for higher accuracy LED current.

• LM3431Q/LM3431AQ are Automotive Grade Products that are AEC-Q100 Grade 1 Qualified (–40°C to 125°C operating junction temperature)
• 3-Channel Programmable LED Current
• High Accuracy Linear Current Regulation
• Analog and Digital PWM Dimming Control
• Up to 25kHz Dimming Frequency
• >100:1 Contrast Ratio
• Integrated Boost Controller
• 5V-36V Input Voltage Range
• Adjustable Switching Frequency up to 1MHz
• LED Short and Open Protection
• Selectable Fault Shutdown or Automatic Restart
• Programmable Fault Delay
• Programmable Cycle by Cycle Current Limit
• Output Over Voltage Protection
• No Audible Noise
• Enable Pin
• LED Over-Temperature Shutdown Input
• Thermal Shutdown
• TSSOP-28 Exposed Pad Package

All trademarks are the property of their respective owners.

• Number of channels (#)
• 3
• Topology
• Boost with Current Sink
• Rating
• Automotive
• Operating temperature range (C)
• -40 to 125
• Vin (Min) (V)
• 4.5
• Vin (Max) (V)
• 36
• Vout (Min) (V)
• 5.5
• Vout (Max) (V)
• 40
• Iout (Max) (A)
• 0.6
• Iq (Typ) (mA)
• 4
• Switching frequency (Max) (kHz)
• 1000
• Features
• Adjustable Switch Frequency, Enable/Shutdown, Soft Start, Thermal Shutdown

LM3431-Q1的完整型号有：LM3431AQMH/NOPB、LM3431AQMHX/NOPB、LM3431QMH/NOPB、LM3431QMHX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM3431AQMH/NOPB，工作温度：-40 to 125，封装：HTSSOP (PWP)-28，包装数量MPQ：48个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM3431AQMH/NOPB的批量USD价格：2.042（1000+）

LM3431AQMHX/NOPB，工作温度：-40 to 125，封装：HTSSOP (PWP)-28，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM3431AQMHX/NOPB的批量USD价格：1.746（1000+）

LM3431QMH/NOPB，工作温度：-40 to 125，封装：HTSSOP (PWP)-28，包装数量MPQ：48个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM3431QMH/NOPB的批量USD价格：2.042（1000+）

LM3431QMHX/NOPB，工作温度：-40 to 125，封装：HTSSOP (PWP)-28，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM3431QMHX/NOPB的批量USD价格：1.746（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)