The LM3528 current mode boost converter offers two separate outputs. The first output (MAIN) is a constant current sink for driving series white LED’s. The second output (SUB/FB) is configurable as a constant current sink for series white LED bias, or as a feedback pin to set a constant output voltage for powering OLED panels.

As a dual output white LED bias supply, the LM3528 adaptively regulates the supply voltage of the LED strings to maximize efficiency and insure the current sinks remain in regulation. The maximum current per output is set via a single external low power resistor. An I²C compatible interface allows for independent adjustment of the LED current in either output from 0 to max current in 128 exponential steps. When configured as a white LED + OLED bias supply the LM3528 can independently and simultaneously drive a string of up to 6 white LED’s and deliver a constant output voltage of up to 21V for OLED panels.

Output over-voltage protection shuts down the device if V_OUT rises above 22V allowing for the use of small sized low voltage output capacitors. Other features include a dedicated general purpose I/O (GPIO) and a multi-function pin (HWEN/PGEN/GPIO) which can be configured as a 32 bit pattern generator, a hardware enable input, or as a GPIO. When configured as a pattern generator, an arbitrary pattern is programmed via the I²C compatible interface and output at HWEN/PGEN/GPIO for indicator LED flashing or for external logic control. The LM3528 is offered in a tiny 12-bump DSBGA package and operates over the -40°C to +85°C temperature range.

• 128 Exponential Dimming Steps
• Programmable Auto-Dimming Function
• Up to 90% Efficient
• Low Profile 12 Bump DSBGA Package (1.2mm x 1.6mm x 0.6mm)
• Integrated OLED Display Power Supply and LED Driver
• Programmable Pattern Generator Output for LED Indicator Function
• Drives up to 12 LED’s at 20mA
• Drives up to 5 LED’s at 20mA and delivers 18V at 40mA
• 1% Accurate Current Matching Between Strings
• Internal Soft-Start Limits Inrush Current
• True Shutdown Isolation for LED’s
• Wide 2.5V to 5.5V Input Voltage Range
• 22V Over-Voltage Protection
• 1.25MHz Fixed Frequency Operation
• Dedicated Programmable General Purpose I/O
• Active Low Hardware Reset

All trademarks are the property of their respective owners.

• Number of channels (#)
• 2
• Vin (Min) (V)
• 2.7
• Vin (Max) (V)
• 5.5
• Vout (Min) (V)
• 0
• Vout (Max) (V)
• 22
• Type
• Inductive
• Switching frequency (Max) (kHz)
• 1250
• LED current per channel (mA)
• 20
• Peak efficiency (%)
• 88
• Topology
• Boost
• Features
• OVP
• Operating temperature range (C)
• -40 to 85

LM3528的完整型号有：LM3528TME/NOPB、LM3528TMX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM3528TME/NOPB，工作温度：-40 to 85，封装：DSBGA (YFQ)-12，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网LM3528TME/NOPB的批量USD价格：1.109（1000+）

LM3528TMX/NOPB，工作温度：-40 to 85，封装：DSBGA (YFQ)-12，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网LM3528TMX/NOPB的批量USD价格：.924（1000+）

LM3528TMEV — LM3528TM 评估板

The LM3528 current mode boost converter offers two separate outputs. The first output (MAIN) is a constant current sink for driving series white LED's. The second output (SUB/FB) is configurable as a constant current sink for series white LED bias, or as a feedback pin to set a constant output (...)

LM3528 Graphical User Interface

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)