- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:LED 驱动器 - 背光 LED 驱动器
- 功能描述:具有可编程环境光感应功能和 I2C 兼容接口的高效白光 LED 驱动器
- 点击这里打开及下载LM3532的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The LM3532 is a 500-kHz fixed frequency asynchronous boost converter which provides the power for 3 high-voltage, low-side current sinks. The device is programmable over an I2C-compatible interface and has independent current control for all three channels. The adaptive current regulation method allows for different LED currents in each current sink thus allowing for a wide variety of backlight and keypad applications.
The main features of the LM3532 include dual ambient light sensor inputs each with 32 internal voltage setting resistors, 8-bit logarithmic and linear brightness control, dual external PWM brightness control inputs, and up to 1000:1 dimming ratio with programmable fade in and fade out settings.
The LM3532 is available in a 16-pin, 0.4-mm pitch thin DSBGA package. The device operates over a 2.7-V to 5.5-V input voltage range and the −40°C to +85°C temperature range.
- Drives up to 3 Parallel High-Voltage LED Strings at 40 V Each With up to 90% Efficiency
- 0.4% Typical Current Matching Between Strings
- 256 Level Logarithmic and Linear Brightness Control With 14-Bit Equivalent Dimming
- I2C-Compatible Interface
- Direct Read Back of Ambient Light Sensor Via 8-bit ADC
- Programmable Dual Ambient Light Sensor Inputs With Internal Sensor Gain Selection
- Dual External PWM Inputs for LED Brightness Adjustment
- Independent Current String Brightness Control
- Programmable LED Current Ramp Rates
- 40-V Overvoltage Protection
- 1-A Typical Current Limit
- Number of channels (#)
- 3
- Vin (Min) (V)
- 2.7
- Vin (Max) (V)
- 5.5
- Vout (Min) (V)
- 0
- Vout (Max) (V)
- 40
- Type
- Inductive
- Switching frequency (Max) (kHz)
- 500
- LED current per channel (mA)
- 30
- Peak efficiency (%)
- 89
- Topology
- Boost
- Features
- OVP
- Operating temperature range (C)
- -40 to 125
LM3532的完整型号有:LM3532TME-40A/NOPB、LM3532TMX-40A/NOPB,以下是这些产品的关键参数及官网采购报价:
LM3532TME-40A/NOPB,工作温度:-40 to 125,封装:DSBGA (YFQ)-16,包装数量MPQ:250个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SNAGCU,TI官网LM3532TME-40A/NOPB的批量USD价格:.499(1000+)
LM3532TMX-40A/NOPB,工作温度:-40 to 125,封装:DSBGA (YFQ)-16,包装数量MPQ:3000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SNAGCU,TI官网LM3532TMX-40A/NOPB的批量USD价格:.416(1000+)
LM3532EVM — LM3532 评估模块
The LM3532 Evaluation Board is designed to fully evaluate the LM3532 Triple Output, White LED Driver with I2C-Compatible Interface. For a detailed description of the LM3532 refer to the LM3532 datasheet. The board comes equipped with 3 series strings of 10 white LEDs. Additionally there are two (...)LM3532SW-LINUX — 用于 LM3532 的 Linux 驱动程序
The Linux driver supports the LMU(Lighting Management Unit) devices for smartphone handsets. The Linux driver supports communication through the I2C bus and interfaces with various sub-systems.Linux Mainline Status
Available in Linux Main line: No
Available through git.ti.com: (...)
LM3532 Graphical User Interface
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)