- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:LED 驱动器 - 照明 LED 驱动器
- 功能描述:具有自动 Vf 和 ESR 检测功能的 LED 闪光灯驱动器,适用于移动摄像机系统
- 点击这里打开及下载LM3550的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The LM3550 device is a low-noise, switched-capacitor DC-DC converter designed to operate as a current-limited and adjustable (up to 5.3 V) super-capacitor charger. The LM3550 features user-selectable termination voltages and provides one adjustable constant current output (up to 200 mA) and one NFET controller ideal for driving one or more high-current LEDs in a high-power flash mode or a low-power torch mode.
The LED current and flash pulse duration of the LM3550 can be programmed via an I2C-compatible interface. The STROBE pin allows the flash to be toggled via a flash-enable signal from a controller or camera module. The EOC pin sinks current when the output voltage reaches 95% of the final value.
The ALD/TEMP input pin allows either a light sensor to adjust the flash-current level based on the ambient light conditions, or it allows for over-temperature detection and protection of the LED during high-power operation or high ambient-temperature conditions.
For all available packages, see the orderable addendum at the end of the data sheet.- Up to 5 A Flash Current
- 4 Selectable Super-Capacitor Charge Voltage Levels (4.5 V, 5 V, 5.3 V, Optimized)
- Adjustable Torch Current (60 mA to 200 mA)
- Ambient Light or LED Thermal Sensing With Current Scaleback
- Dedicated Indicator LED Current Source
- No Inductor Required
- Programmable Flash Pulse Duration, and Torch and Flash Currents via I2C-Compatible Interface
- True Shutdown (LED Disconnect)
- Flash Timeout Protection
- Low Profile 20-Pin UQFN Package (3 mm × 2.5 mm × 0.8 mm)
- Input voltage (type)
- Linear
- Topology
- Charge pump
- Vin (Min) (V)
- 2.7
- Vin (Max) (V)
- 5.5
- Iout (Max) (A)
- 5
- Iq (Typ) (mA)
- 0.168
- Features
- OVP
- Operating temperature range (C)
- -30 to 85
- Dimming method
- Analog, PWM
LM3550的完整型号有:LM3550SP/NOPB、LM3550SPX/NOPB,以下是这些产品的关键参数及官网采购报价:
LM3550SP/NOPB,工作温度:-30 to 85,封装:UQFN (NHU)-20,包装数量MPQ:1000个,MSL 等级/回流焊峰值温度:Level-3-260C-168 HR,引脚镀层/焊球材料:SN,TI官网LM3550SP/NOPB的批量USD价格:.739(1000+)
LM3550SPX/NOPB,工作温度:-30 to 85,封装:UQFN (NHU)-20,包装数量MPQ:4500个,MSL 等级/回流焊峰值温度:Level-3-260C-168 HR,引脚镀层/焊球材料:SN,TI官网LM3550SPX/NOPB的批量USD价格:.616(1000+)
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
TIDA-00376 — 压电式扬声器频闪灯通知参考设计
TIDA-00376 使用我们的工业压电式驱动器、闪光灯 LED 驱动器和超低功耗 FRAM 微控制器 (MCU) 来演示听觉和视觉通知子系统的实现方式,这些子系统主要应用于火灾警报终端设备系统。该参考设计展示了通过单个压电传感器和一个低输入电流和高光输出 LED 频闪灯生成的多警报音频率输出。