The LM3555 is a 2-MHz fixed-frequency, current-mode synchronous boost converter designed to drive either a single flash LED at 500 mA or two series flash LEDs at 400 mA. A high-voltage current source allows the LEDs to be terminated to the GND plane eliminating the need for an additional return trace back to the device.

A dual-mode control interface allows the user to configure the LM3555 with a general-purpose interface using two enable pins for control or an I²C allowing a higher level of control. Both interfaces allow access to the indicator, assist light, and flash modes. A dedicated STROBE pin provides a direct interface to trigger the flash event, while an external TORCH pin provides an additional method for enabling the LEDs in a constant current mode.

The LM3555 can adaptively scale the maximum flash level delivered to the LEDs based upon the flash configuration, whether it be a single LED or two LEDs in series.

Eight protection features are available on the LM3555 ranging from overvoltage protection to broken inductor detection. The LM3555 has four selectable inductor current limits to help the user select an inductor that is appropriate for the design.

For all available packages, see the orderable addendum at the end of the data sheet.

• High-Voltage High-Side Current Source Allows for Grounded Cathode LED Operation
• Synchronous Boost Converter
• Peak Converter Efficiency > 90%
• Accurate and Programmable LED Current Ranging From 60 mA to 500 mA
• Adaptive LED Current Range Based on LED Configuration
• Dedicated Indicator Current Source
• Dedicated Torch and Strobe Pins
• Dual Mode Control (General Purpose or I2C)
• Broken Inductor Detection
• Output Overvoltage Protection
• Output and LED Short-Circuit Protection
• 400-kHz I2C-Compatible Interface

• Input voltage (type)
• DC/DC
• Topology
• Boost, Current Mode
• Vin (Min) (V)
• 2.5
• Vin (Max) (V)
• 5.5
• Iout (Max) (A)
• 0.5
• Iq (Typ) (mA)
• 3.5
• Features
• OVP
• Operating temperature range (C)
• -30 to 85
• Dimming method
• Analog, PWM

LM3555的完整型号有：LM3555TLE/NOPB、LM3555TLX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM3555TLE/NOPB，工作温度：-30 to 85，封装：DSBGA (YZR)-12，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网LM3555TLE/NOPB的批量USD价格：.37（1000+）

LM3555TLX/NOPB，工作温度：-30 to 85，封装：DSBGA (YZR)-12，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网LM3555TLX/NOPB的批量USD价格：.308（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)