The LM4665 is a fully integrated single-supply high efficiency switching audio amplifier. It features an innovative modulator that eliminates the LC output filter used with typical switching amplifiers. Eliminating the output filter reduces parts count, simplifies circuit design, and reduces board area. The LM4665 processes analog inputs with a delta-sigma modulation technique that lowers output noise and THD when compared to conventional pulse width modulators.

The LM4665 is designed to meet the demands of mobile phones and other portable communication devices. Operating on a single 3V supply, it is capable of driving 8? transducer loads at a continuous average output of 400mW with less than 2%THD+N.

The LM4665 has high efficiency with an 8? transducer load compared to a typical Class AB amplifier. With a 3V supply, the IC's efficiency for a 100mW power level is 75%, reaching 80% at 400mW output power.

The LM4665 features a low-power consumption shutdown mode. Shutdown may be enabled by either a logic high or low depending on the mode selection. Connecting the Shutdown Mode pin to either V_DD (high) or GND (low) enables the Shutdown pin to be driven in a likewise manner to activate shutdown.

The LM4665 has fixed selectable gain of either 6dB or 12dB. The LM4665 has short circuit protection against a short from the outputs to V_DD, GND or across the outputs.

• No Output Filter Required for Inductive Transducers
• Selectable Gain of 6dB (2V/V) or 12dB (4V/V)
• Very Fast Turn On Time: 5ms (typ)
• User Selectable Shutdown High or Low Logic Level
• Minimum External Components
• "Click and Pop" Suppression Circuitry
• Micro-Power Shutdown Mode
• Short Circuit Protection
• DSBGA, WSON, and VSSOP Packages (No Heat Sink Required)

Key Specifications

• Efficiency at 100mW into 8? Transducer 75%(typ)
• Efficiency at 400mW into 8? Transducer 80%(typ)
• Total Quiescent Power Supply Current (3V) 3mA(typ)
• Total Shutdown Power Supply Current (3V) 0.01μA(typ)
• Single Supply Range (VSSOP & WSON) 2.7V to 5.5V
• Single Supply Range (DSBGA) (Note 11) 2.7V to 3.8V

All trademarks are the property of their respective owners.

• Audio input type
• Analog Input
• Architecture
• Class-D
• Speaker channels (Max)
• Mono
• Power stage supply (Max) (V)
• 5.5
• Power stage supply (Min) (V)
• 2.7
• Load (Min) (ohms)
• 4
• Output power (W)
• 1.4
• THD + N @ 1 kHz (%)
• 0.8
• Iq (Typ) (mA)
• 14
• Control interface
• Hardware
• Closed/open loop
• Open
• Analog supply (Min) (V)
• 2.7
• Analog supply (Max) (V)
• 5.5
• PSRR (dB)
• 52
• Operating temperature range (C)
• -40 to 85

LM4665的完整型号有：LM4665ITL/NOPB，以下是这些产品的关键参数及官网采购报价：

LM4665ITL/NOPB，工作温度：-40 to 85，封装：DSBGA (YZR)-9，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网LM4665ITL/NOPB的批量USD价格：.406（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)