The LM4666 is a fully integrated single-supply high efficiency switching audio amplifier. It features an innovative modulator that eliminates the LC output filter used with typical switching amplifiers. Eliminating the output filter reduces parts count, simplifies circuit design, and reduces board area. The LM4666 processes analog inputs with a delta-sigma modulation technique that lowers output noise and THD when compared to conventional pulse width modulators.

The LM4666 is designed to meet the demands of mobile phones and other portable communication devices. Operating on a single 3V supply, it is capable of driving 8? transducer loads at a continuous average output of 450mW with less than 1%THD+N. Its flexible power supply requirements allow operation from 2.8V to 5.5V.

The LM4666 has high efficiency with an 8? transducer load compared to a typical Class AB amplifier. With a 3V supply, the IC's efficiency for a 100mW power level is 79%, reaching 84% at 450mW output power.

The LM4666 features a low-power consumption shutdown mode. Shutdown may be enabled by driving the Shutdown pin to a logic low (GND).

The LM4666 has fixed selectable gain of either 6dB or 12dB. The LM4666 has short circuit protection against a short from the outputs to V_DD or GND.

• No Output Filter Required for Inductive Transducers
• Selectable Gain of 6dB or 12dB
• Very Fast Turn On Time: 6ms (typ)
• Minimum External Components
• "Click and Pop" Suppression Circuitry
• Micro-Power Shutdown Mode
• Short Circuit Protection
• Available in Space-Saving NHK0014A Package

Key Specifications

• Efficiency at 3V, 100mW into 8? Transducer: 79% (typ)
• Efficiency at 3V, 450mW into 8? Transducer: 84% (typ)
• Efficiency at 5V, 1W into 8? Transducer: 85% (typ)
• Total Quiescent Power Supply Current: 7.0mA (typ)
• Total Shutdown Power Supply Current: 0.02μA (typ)
• Single supply range: 2.8V to 5.5V

All trademarks are the property of their respective owners.

• Audio input type
• Analog Input
• Architecture
• Class-D
• Speaker channels (Max)
• Stereo
• Power stage supply (Max) (V)
• 5.5
• Power stage supply (Min) (V)
• 2.8
• Load (Min) (ohms)
• 4
• Output power (W)
• 1.2
• SNR (dB)
• 83
• THD + N @ 1 kHz (%)
• 0.65
• Iq (Typ) (mA)
• 15
• Control interface
• Hardware
• Closed/open loop
• Closed
• Analog supply (Min) (V)
• 2.8
• Analog supply (Max) (V)
• 5.5
• PSRR (dB)
• 65
• Operating temperature range (C)
• -40 to 85

LM4666的完整型号有：LM4666SD/NOPB，以下是这些产品的关键参数及官网采购报价：

LM4666SD/NOPB，工作温度：-40 to 85，封装：WSON (NHK)-14，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM4666SD/NOPB的批量USD价格：.532（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)