The LM4674A is a single supply, high efficiency, 2.5W/channel, filterless switching audio amplifier. A low noise PWM architecture eliminates the output filter, reducing external component count, board area consumption, system cost, and simplifying design.

The LM4674A is designed to meet the demands of mobile phones and other portable communication devices. Operating from a single 5V supply, the device is capable of delivering 2.5W/channel of continuous output power to a 4? load with less than 10% THD+N. Flexible power supply requirements allow operation from 2.4V to 5.5V.

The LM4674A features high efficiency compared to conventional Class AB amplifiers. When driving an 8? speaker from a 3.6V supply, the device features 85% efficiency at P_O = 500mW. Four gain options are pin selectable through the GAIN0 and GAIN1 pins.

Output short circuit protection prevents the device from being damaged during fault conditions. Superior click and pop suppression eliminates audible transients on power-up/down and during shutdown. Independent left/right shutdown controls maximizes power savings in mixed mono/stereo applications.

• Output Short Circuit Protection
• Stereo Class D Operation
• No Output Filter Required
• Logic Selectable Gain
• Independent Shutdown Control
• Minimum External Components
• Click and Pop Suppression
• Micro-Power Shutdown
• Available in Space-Saving 2mm x 2mm x 0.6mm DSBGA Package

Key Specifications

• Efficiency at 3.6V, 100mW into 8? 80% (typ)
• Efficiency at 3.6V, 500mW into 8? 85% (typ)
• Efficiency at 5V, 1W into 8? 85% (typ)
• Quiescent Power Supply Current at 3.6V Supply 4mA
• Power Output at VDD = 5V, RL = 4?, THD ≤ 10% 2.5W (typ)
• Power Output at VDD = 5V, RL = 8?, THD ≤ 10% 1.5W (typ)
• Shutdown Current 0.1μA (typ)

All trademarks are the property of their respective owners.

• Audio input type
• Analog Input
• Architecture
• Class-D
• Speaker channels (Max)
• Stereo
• Power stage supply (Max) (V)
• 5.5
• Power stage supply (Min) (V)
• 2.4
• Load (Min) (ohms)
• 4
• Output power (W)
• 1.2
• SNR (dB)
• 96
• THD + N @ 1 kHz (%)
• 0.07
• Iq (Typ) (mA)
• 5
• Control interface
• Hardware
• Closed/open loop
• Open
• Analog supply (Min) (V)
• 2.4
• Analog supply (Max) (V)
• 5.5
• PSRR (dB)
• 73
• Operating temperature range (C)
• -40 to 85

LM4674A的完整型号有：LM4674ATL/NOPB、LM4674ATLX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM4674ATL/NOPB，工作温度：-40 to 85，封装：DSBGA (YZR)-16，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网LM4674ATL/NOPB的批量USD价格：.638（1000+）

LM4674ATLX/NOPB，工作温度：-40 to 85，封装：DSBGA (YZR)-16，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网LM4674ATLX/NOPB的批量USD价格：.532（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)