- 制造厂商：TI
- 产品类别：音频
- 技术类目：音频放大器 - 扬声器放大器
- 功能描述：具有集成静音功能的 11W 立体声、9V 至 40V 电源电压、模拟输入 AB 类音频放大器
- 点击这里打开及下载LM4755的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The LM4755 is a stereo audio amplifier capable of delivering 11W per channel of continuous average output power to a 4? load or 7W per channel into 8? using a single 24V supply at 10% THD+N. The internal mute circuit and pre-set gain resistors provide for a very economical design solution.
Output power specifications at both 20V and 24V supplies and low external component count offer high value to consumer electronic manufacturers for stereo TV and compact stereo applications. The LM4755 is specifically designed for single supply operation.
- Drives 4? and 8? Loads
- Integrated Mute Function
- Internal Gain Resistors
- Minimal External Components Needed
- Single Supply Operation
- Internal Current Limiting and Thermal Protection
- Compact 9-lead TO-220 Package
- Wide Supply Range 9V - 40V
- Output Power at 10% THD with 1kHz into 4? at VCC = 24V 11 W (typ)
- Output Power at 10% THD with 1kHz into 8? at VCC = 24V 7 W (typ)
- Closed Loop Gain 34 dB (typ)
- PO at 10% THD+N @ 1kHz into 4? Single-Ended DDPAK Package at VCC=12V 2.5 W (typ)
- PO at 10% THD+N @ 1kHz into 8? Bridged DDPAK Package at VCC=12V 5 W (typ)
All trademarks are the property of their respective owners.
- Audio input type
- Analog Input
- Architecture
- Class-AB
- Speaker channels (Max)
- Stereo
- Power stage supply (Max) (V)
- 40
- Power stage supply (Min) (V)
- 9
- Load (Min) (ohms)
- 4
- Output power (W)
- 11
- THD + N @ 1 kHz (%)
- 0.08
- Iq (Typ) (mA)
- 5
- Control interface
- Hardware
- Closed/open loop
- Closed
- Analog supply (Min) (V)
- 9
- Analog supply (Max) (V)
- 40
- PSRR (dB)
- 50
- Operating temperature range (C)
- -20 to 80
LM4755的完整型号有：LM4755TSX/NOPB，以下是这些产品的关键参数及官网采购报价：
LM4755TSX/NOPB，工作温度：-20 to 80，封装：DDPAK/TO-263 (KTW)-9，包装数量MPQ：500个，MSL 等级/回流焊峰值温度：Level-3-245C-168 HR，引脚镀层/焊球材料：SN，TI官网LM4755TSX/NOPB的批量USD价格：1.065（1000+）
LM4755 Unencrypted PSpice Mode (Rev. A)
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
