The LM48310 is a single supply, high efficiency, mono, 2.6W, filterless switching audio amplifier. The LM48310 features TI’s Enhanced Emissions Suppression (E²S) system, that features a unique patent-pending ultra low EMI, spread spectrum, PWM architecture, that significantly reduces RF emissions while preserving audio quality and efficiency. The E²S system improves battery life, reduces external component count, board area consumption, system cost, and simplifying design.

The LM48310 is designed to meet the demands of portable multimedia devices. Operating from a single 5V supply, the device is capable of delivering 2.6W of continuous output power to a 4? load with less than 10% THD+N. Flexible power supply requirements allow operation from 2.4V to 5.5V. The LM48310 offers two logic selectable modulation schemes, fixed frequency mode, and an EMI suppressing spread spectrum mode. The E²S system includes an advanced, patent-pending edge rate control (ERC) architecture that further reduce emissions by minimizing the high frequency component of the device output, while maintaining high quality audio reproduction (THD+N = 0.03%) and high efficiency (η = 88%). The LM48310 also features a SYNC_IN input and SYNC_OUT, which allows multiple devices to operate with the same switching frequency, eliminating beat frequencies and any other interference caused by clock intermodulation.

The LM48310 features high efficiency compared to conventional Class AB amplifiers, and other low EMI Class D amplifiers. When driving and 8? speaker from a 5V supply, the device operates with 88% efficiency at P_O = 1W. The gain of the LM48310 is internally set to 12dB, further reducing external component count. A low power shutdown mode reduces supply current consumption to 0.01μA.

Advanced output short circuit protection with auto-recovery prevents the device from being damaged during fault conditions. Superior click and pop suppression eliminates audible transients on power-up/down and during shutdown.

• Passes FCC Class B Radiated Emissions with 20 inches of cable
• E2S System Reduces EMI while Preserving Audio Quality and Efficiency
• Output Short Circuit Protection with Auto-Recovery
• Stereo Class D Operation
• No Output Filter Required
• Internally Configured Gain (12dB)
• Synchronizable Oscillator for Multi-Channel Operation
• Low Power Shutdown Mode
• Minimum External Components
• "Click and Pop" Suppression
• Micro-Power Shutdown
• Available in Space-Saving WSON Package

Key Specifications

• Efficiency at 3.6V, 400mW into 8? 85% (typ)
• Efficiency at 5V, 1W into 8? 88% (typ)
• Quiescent Power Supply Current at 5V 3.2mA
• Power Output at VDD = 5V, RL = 4?, THD+N ≤ 10% 2.6W (typ)
• Power Output at VDD = 5V, RL = 8?, THD+N ≤ 10% 1.6W (typ)
• Shutdown Current 0.01μA (typ)

All trademarks are the property of their respective owners.

• Audio input type
• Analog Input
• Architecture
• Class-D
• Speaker channels (Max)
• Mono
• Power stage supply (Max) (V)
• 5.5
• Power stage supply (Min) (V)
• 2.4
• Load (Min) (ohms)
• 4
• Output power (W)
• 2.6
• SNR (dB)
• 97
• THD + N @ 1 kHz (%)
• 0.03
• Iq (Typ) (mA)
• 3.2
• Control interface
• Hardware
• Closed/open loop
• Open
• Analog supply (Min) (V)
• 2.4
• Analog supply (Max) (V)
• 5.5
• PSRR (dB)
• 82
• Operating temperature range (C)
• -40 to 85

LM48310的完整型号有：LM48310SD/NOPB，以下是这些产品的关键参数及官网采购报价：

LM48310SD/NOPB，工作温度：-40 to 85，封装：WSON (DSC)-10，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM48310SD/NOPB的批量USD价格：.585（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)