The LM4836 is a monolithic integrated circuit that provides DC volume control, and stereo bridged audio power amplifiers capable of producing 2W into 4? with less than 1.0% THD+N, or 2.2W into 3? with less than 1.0% THD+N (see Notes below).

Boomer audio integrated circuits were designed specifically to provide high quality audio while requiring a minimum amount of external components. The LM4836 incorporates a DC volume control, stereo bridged audio power amplifiers, selectable gain or bass boost, and an input mux making it optimally suited for multimedia monitors, portable radios, desktop, and portable computer applications.

The LM4836 features an externally controlled, low-power consumption shutdown mode, and both a power amplifier and headphone mute for maximum system flexibility and performance.

Note: When properly mounted to the circuit board, the LM4836LQ and LM4836MTE will deliver 2W into 4?. The LM4836MT will deliver 1.1W into 8?. See the section for LM4836LQ and LM4836MTE usage information.

Note: An LM4836LQ and LM4836MTE that have been properly mounted to the circuit board and forced-air cooled will deliver 2.2W into 3?.

• PC98 and PC99 Compliant
• DC Volume Control Interface
• Input Mux
• System Beep Detect
• Stereo Switchable Bridged/Single-Ended Power Amplifiers
• Selectable Internal/External Gain and Bass Boost Configurable
• “Click and Pop” Suppression Circuitry
• Thermal Shutdown Protection Circuitry

Key Specifications

• PO at 1% THD+N
• Into 3Ω (LM4836LQ, LM4836MTE) 2.2 W (typ)
• Into 4Ω (LM4836LQ, LM4836MTE) 2.0 W (typ)
• Into 8Ω (LM4836) 1.1 W (typ)
• Single-Ended Mode - THD+N at 85 mW Into 32Ω 1.0% (typ)
• Shutdown Current 0.2μA (typ)

All trademarks are the property of their respective owners.

• Audio input type
• Analog Input
• Architecture
• Class-AB
• Speaker channels (Max)
• Stereo
• Power stage supply (Max) (V)
• 5.5
• Power stage supply (Min) (V)
• 2.7
• Load (Min) (ohms)
• 3
• Output power (W)
• 2.5
• SNR (dB)
• 93
• THD + N @ 1 kHz (%)
• 0.3
• Iq (Typ) (mA)
• 15
• Control interface
• Hardware
• Closed/open loop
• Closed
• Analog supply (Min) (V)
• 2.7
• Analog supply (Max) (V)
• 5.5
• PSRR (dB)
• 74
• Operating temperature range (C)
• -40 to 85

LM4836的完整型号有：LM4836LQ/NOPB、LM4836MTEX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM4836LQ/NOPB，工作温度：-40 to 85，封装：WQFN (NJB)-28，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM4836LQ/NOPB的批量USD价格：1.975（1000+）

LM4836MTEX/NOPB，工作温度：-40 to 85，封装：HTSSOP (PWP)-28，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM4836MTEX/NOPB的批量USD价格：1.975（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)