The LM4860 is a bridge-connected audio power amplifier capable of delivering 1W of continuous average power to an 8Ω load with less than 1% THD+N over the audio spectrum from a 5V power supply.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components using surface mount packaging. Since the LM4860 does not require output coupling capacitors, bootstrap capacitors or snubber networks, it is optimally suited for low-power portable systems.

The LM4860 features an externally controlled, low-power consumption shutdown mode, as well as an internal thermal shutdown protection mechanism. It also includes two headphone control inputs and a headphone sense output for external monitoring.

The unity-gain stable LM4860 can be configured by external gain setting resistors for differential gains of up to 10 without the use of external compensation components. Higher gains may be achieved with suitable compensation.

• No Output Coupling Capacitors, Bootstrap Capacitors, or Snubber Circuits are Necessary
• Small Outline (SO) Packaging
• Compatible with PC Power Supplies
• Thermal Shutdown Protection Circuitry
• Unity-Gain Stable
• External Gain Configuration Capability
• Two Headphone Control Inputs and Headphone Sensing Output

Key Specifications

• THD+N at 1W Continuous Average
• Output Power into 8Ω: 1% (Max)
• Instantaneous Peak Output Power:? > 2 W
• Shutdown Current: ?0.6 μA (typ)

All trademarks are the property of their respective owners.

• Audio input type
• Analog Input
• Architecture
• Class-AB
• Speaker channels (Max)
• Mono
• Power stage supply (Max) (V)
• 5.5
• Power stage supply (Min) (V)
• 2.7
• Load (Min) (ohms)
• 8
• Output power (W)
• 1.3
• THD + N @ 1 kHz (%)
• 0.72
• Iq (Typ) (mA)
• 7
• Control interface
• Hardware
• Closed/open loop
• Closed
• Analog supply (Min) (V)
• 2.7
• Analog supply (Max) (V)
• 5.5
• PSRR (dB)
• 65
• Operating temperature range (C)
• -20 to 85

LM4860的完整型号有：LM4860M、LM4860M/NOPB、LM4860MX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM4860M，工作温度：-20 to 85，封装：SOIC (D)-16，包装数量MPQ：48个，MSL 等级/回流焊峰值温度：Level-1-235C-UNLIM，引脚镀层/焊球材料：SNPB，TI官网LM4860M的批量USD价格：.987（1000+）

LM4860M/NOPB，工作温度：-20 to 85，封装：SOIC (D)-16，包装数量MPQ：48个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM4860M/NOPB的批量USD价格：.74（1000+）

LM4860MX/NOPB，工作温度：-20 to 85，封装：SOIC (D)-16，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM4860MX/NOPB的批量USD价格：.617（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)