- 制造厂商:TI
- 产品类别:音频
- 技术类目:音频放大器 - 扬声器放大器
- 功能描述:1.1W 单声道、模拟输入 AB 类音频放大器
- 点击这里打开及下载LM4861的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The LM4861 is a bridge-connected audio power amplifier capable of delivering 1.1W of continuous average power to an 8Ω load with 1% THD+N using a 5V power supply.
Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components using surface mount packaging. Since the LM4861 does not require output coupling capacitors, bootstrap capacitors, or snubber networks, it is optimally suited for low-power portable systems.
The LM4861 features an externally controlled, low-power consumption shutdown mode, as well as an internal thermal shutdown protection mechanism.
The unity-gain stable LM4861 can be configured by external gain-setting resistors for differential gains of up to 10 without the use of external compensation components. Higher gains may be achieved with suitable compensation.
- No output coupling capacitors, bootstrap capacitors, or snubber circuits are necessary
- Small Outline (SOIC) packaging
- Compatible with PC power supplies
- Thermal shutdown protection circuitry
- Unity-gain stable
- External gain configuration capability
- THD+N for 1kHz at 1W continuous?average output power into 8? 1.0% (max)
- Output power at 10% THD+N at 1kHz into 8? 1.5 W (typ)
- Shutdown Current 0.6μA (typ)
All trademarks are the property of their respective owners.
- Audio input type
- Analog Input
- Architecture
- Class-AB
- Speaker channels (Max)
- Mono
- Power stage supply (Max) (V)
- 5.5
- Power stage supply (Min) (V)
- 2
- Load (Min) (ohms)
- 8
- Output power (W)
- 1.6
- THD + N @ 1 kHz (%)
- 0.72
- Iq (Typ) (mA)
- 6.5
- Control interface
- Hardware
- Closed/open loop
- Closed
- Analog supply (Min) (V)
- 2
- Analog supply (Max) (V)
- 5.5
- PSRR (dB)
- 65
- Operating temperature range (C)
- -40 to 85
LM4861的完整型号有:LM4861M、LM4861M/NOPB、LM4861MX、LM4861MX/NOPB,以下是这些产品的关键参数及官网采购报价:
LM4861M,工作温度:-40 to 85,封装:SOIC (D)-8,包装数量MPQ:95个,MSL 等级/回流焊峰值温度:Level-1-235C-UNLIM,引脚镀层/焊球材料:SNPB,TI官网LM4861M的批量USD价格:.672(1000+)
LM4861M/NOPB,工作温度:-40 to 85,封装:SOIC (D)-8,包装数量MPQ:95个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LM4861M/NOPB的批量USD价格:.576(1000+)
LM4861MX,工作温度:-40 to 85,封装:SOIC (D)-8,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-235C-UNLIM,引脚镀层/焊球材料:SNPB,TI官网LM4861MX的批量USD价格:.576(1000+)
LM4861MX/NOPB,工作温度:-40 to 85,封装:SOIC (D)-8,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LM4861MX/NOPB的批量USD价格:.48(1000+)
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)