The LM4889 is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1 watt of continuous average power to an 8? BTL load with less than 2% distortion (THD+N) from a 5V_DC power supply.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4889 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement.

The LM4889 features a low-power consumption shutdown mode, which is achieved by driving the shutdown pin with a logic low. Additionally, the LM4889 features an internal thermal shutdown protection mechanism.

The LM4889 contains advanced pop & click circuitry to eliminate noise which would otherwise occur during turn-on and turn-off transitions.

The LM4889 is unity-gain stable and can be configured by external gain-setting resistors.

• Available in Space-Saving VSSOP, SOIC, WSON, and DSBGA Packages
• Ultra Low Current Shutdown Mode (3.3 to 2.6V - 0.01μA)
• Can Drive Capacitive Loads up to 500 pF
• Improved Pop & Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
• 2.2 - 5.5V Operation
• No Output Coupling Capacitors, Snubber Networks or Bootstrap Capacitors Required
• Unity-Gain Stable
• External Gain Configuration Capability

Key Specifications

• Improved PSRR at 217Hz, 5 - 3.3V 75dB
• Power Output at 5.0V & 2% THD 1.0W(typ.)
• Power Output at 3.3V & 1% THD 400mW(typ.)
• Shutdown Current at 3.3 & 2.6V 0.01μA(typ.)

All trademarks are the property of their respective owners. Boomer is a trademark of Texas Instruments.

• Audio input type
• Analog Input
• Architecture
• Class-AB
• Speaker channels (Max)
• Mono
• Power stage supply (Max) (V)
• 5.5
• Power stage supply (Min) (V)
• 2.2
• Load (Min) (ohms)
• 8
• Output power (W)
• 1.2
• SNR (dB)
• 93
• THD + N @ 1 kHz (%)
• 0.1
• Iq (Typ) (mA)
• 5
• Control interface
• Hardware
• Closed/open loop
• Open
• Analog supply (Min) (V)
• 2.2
• Analog supply (Max) (V)
• 5.5
• PSRR (dB)
• 66
• Operating temperature range (C)
• -40 to 85

LM4889的完整型号有：LM4889MA/NOPB、LM4889MAX/NOPB、LM4889MM/NOPB、LM4889MMX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM4889MA/NOPB，工作温度：-40 to 85，封装：SOIC (D)-8，包装数量MPQ：95个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM4889MA/NOPB的批量USD价格：.576（1000+）

LM4889MAX/NOPB，工作温度：-40 to 85，封装：SOIC (D)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM4889MAX/NOPB的批量USD价格：.48（1000+）

LM4889MM/NOPB，工作温度：-40 to 85，封装：VSSOP (DGK)-8，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM4889MM/NOPB的批量USD价格：.676（1000+）

LM4889MMX/NOPB，工作温度：-40 to 85，封装：VSSOP (DGK)-8，包装数量MPQ：3500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM4889MMX/NOPB的批量USD价格：.58（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)