- 制造厂商:TI
- 产品类别:音频
- 技术类目:音频放大器 - 耳机放大器
- 功能描述:95mW 立体声模拟输入耳机放大器
- 点击这里打开及下载LM4917的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The LM4917 is a stereo, output capacitor-less headphone amplifier capable of delivering 95mW of continuous average power into a 16? load with less than 1% THD+N from a single 3V power supply.
The LM4917 provides high quality audio reproduction with minimal external components. A ground referenced output eliminates the output coupling capacitors typically required by single-ended loads, reducing component count, cost and board space consumption. This makes the LM4917 ideal for mobile phones and other portable equipment where board space is at a premium. Eliminating the output coupling capacitors also improves low frequency response.
The LM4917 operates from a single 1.4V to 3.6V power supply, features low 0.02% THD+N and 70dB PSRR. Independent right/left channel low-power shutdown controls provide power saving flexibility for mono/stereo applications. Superior click and pop suppression eliminates audible transients during start up and shutdown. Short circuit and thermal overload protection protects the device during fault conditions.
- Ground Referenced Outputs
- High PSRR
- Available in Space-Saving TSSOP Package
- Ultra Low Current Shutdown Mode
- Improved Pop and Click Circuitry eliminates Noises During Turn-On and Turn-Off Transitions
- 1.4 – 3.6V Operation
- No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors
- Shutdown Either Channel Independently
- Improved PSRR at 1kHz: 70dB (Typ)
- Power Output at VDD = 3V, RL = 16?, THD ≦ 1%: 95mW (Typ)
- Shutdown Current: 0.01μA (Typ)
All trademarks are the property of their respective owners.
- Output power (W)
- 0.097
- Analog supply (Min) (V)
- 1.4
- Analog supply (Max) (V)
- 3.6
- PSRR (dB)
- 70
- Rating
- Catalog
- Operating temperature range (C)
- -40 to 85
- Headphone channels
- Stereo
- Volume control
- No
- Shutdown current (ISD) (uA)
- 0.01
- Architecture
- Class-AB (ground-centered)
- Iq per channel (Typ) (mA)
- 5.5
LM4917的完整型号有:LM4917MT/NOPB、LM4917MTX/NOPB、LM4917SD/NOPB,以下是这些产品的关键参数及官网采购报价:
LM4917MT/NOPB,工作温度:-40 to 85,封装:TSSOP (PW)-14,包装数量MPQ:94个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LM4917MT/NOPB的批量USD价格:1.396(1000+)
LM4917MTX/NOPB,工作温度:-40 to 85,封装:TSSOP (PW)-14,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LM4917MTX/NOPB的批量USD价格:1.163(1000+)
LM4917SD/NOPB,工作温度:-40 to 85,封装:WSON (NHK)-14,包装数量MPQ:1000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LM4917SD/NOPB的批量USD价格:1.163(1000+)
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)