The LM4947 is an audio subsystem capable of efficiently delivering 500mW (Class D operation) of continuous average power into a mono 8? bridged-tied load (BTL) with 1% THD+N, 37mW (Class AB operation) power channel of continuous average power into stereo 32? single-ended (SE) loads with 1% THD+N, or an output capacitor-less (OCL) configuration with identical specification as the SE configuration, from a 3.3V power supply.

The LM4947 has six input channels: one pair for a two-channel stereo signal, the second pair for a secondary two-channel stereo input, and the third pair for a differential single-channel mono input. Additionally, the two sets of stereo inputs may be configured as a single stereo differential input (differential left and differential right). The LM4947 features a 32-step digital volume control and eight distinct output modes. The digital volume control, 3D enhancement, and output modes are programmed through a two-wire I²C compatible interface that allows flexibility in routing and mixing audio channels.

The RF suppression circuitry in the LM4947 makes it well-suited for GSM mobile phones and other portable applications in which strong RF signals generated by an antenna (and long output traces) may couple audibly into the amplifier.

The LM4947 is designed for cellular phones, PDAs, and other portable handheld applications. It delivers high quality output power from a surface-mount package and requires only eight external components in the OCL mode (two additional components in SE mode).

• I2C Control Interface
• I2C Programmable Texas Instruments 3D Audio
• I2C Controlled 32 Step Digital Volume Control (-59.5dB to +18dB)
• Three Independent Volume Channels (Left, Right, Mono)
• Eight Distinct Output Modes
• Small, 25–Bump DSBGA Packaging
• “Click and Pop” Suppression Circuitry
• Thermal Shutdown Protection
• Low Shutdown Current (0.1μA, typ)
• RF Suppression
• Differential Mono and Stereo Inputs
• Stereo Input Mux

Key Specifications

• THD+N at 1kHz, 500mW?into 8? BTL (3.3V): 1.0% (typ)
• THD+N at 1kHz, 37mW?into 32? SE (3.3V): 1.0% (typ)
• Single Supply Operation (VDD): 2.7 to 5.5 V
• I2C Single Supply Operation: 2.2 to 5.5 V

All trademarks are the property of their respective owners.

• Audio input type
• Analog Input
• Architecture
• Class-D
• Speaker channels (Max)
• Mono
• Power stage supply (Max) (V)
• 5.5
• Power stage supply (Min) (V)
• 2.7
• Load (Min) (ohms)
• 8
• Output power (W)
• 1.19
• THD + N @ 1 kHz (%)
• 0.03
• Iq (Typ) (mA)
• 4.5
• Control interface
• I2C
• Closed/open loop
• Open
• Analog supply (Min) (V)
• 2.7
• Analog supply (Max) (V)
• 5.5
• PSRR (dB)
• 79
• Operating temperature range (C)
• -40 to 85

LM4947的完整型号有：LM4947TL/NOPB，以下是这些产品的关键参数及官网采购报价：

LM4947TL/NOPB，工作温度：-40 to 85，封装：DSBGA (YZR)-25，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网LM4947TL/NOPB的批量USD价格：1.4（1000+）

LM4947TLEVAL — 具有 OCL 耳机放大器和美国国家半导体 3D 的单声道 D 类和立体声音频子系统

The LM4947 is an integrated stereo subsystem with a filterless monoClass D speaker amplifier and selectable output low noise headphone amplifier in a 25-bump micro SMD package. The LM4947 also features RF suppression circuitry and TI 3D enhancement. The LM4947 is designed to meet the demands of (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)