- 制造厂商:TI
- 产品类别:音频
- 技术类目:音频放大器 - 扬声器放大器
- 功能描述:3.1W 立体声、9.6V 至 16V 电源电压、模拟输入 AB 类音频放大器
- 点击这里打开及下载LM4952的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The LM4952 is a dual audio power amplifier primarily designed for demanding applications in flat panel monitors and TV's. It is capable of delivering 3.1 watts per channel to a 4? single-ended load with less than 1% THD+N when powered by a 12VDC power supply.
Eliminating external feedback resistors, an internal, DC-controlled, volume control allows easy and variable gain adjustment.
Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4952 does not require bootstrap capacitors or snubber circuits. Therefore, it is ideally suited for display applications requiring high power and minimal size.
The LM4952 features a low-power consumption active-low shutdown mode. Additionally, the LM4952 features an internal thermal shutdown protection mechanism along with short circuit protection.
The LM4952 contains advanced pop & click circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions.
- Pop & Click Circuitry Eliminates Noise During Turn-on and Turn-off Transitions
- Low Current, Active-low Shutdown Mode
- Low Quiescent Current
- Stereo 3.8W Output, RL = 4?
- DC-controlled Volume Control
- Short Circuit Protection
- Quiscent Power Supply Current 18mA (typ)
- POUT @ VDD = 12V, RL = 4Ω, 10% THD+N 3.8W (typ)
- Shutdown current 55μA (typ)
All trademarks are the property of their respective owners.
- Audio input type
- Analog Input
- Architecture
- Class-AB
- Speaker channels (Max)
- Stereo
- Power stage supply (Max) (V)
- 16
- Power stage supply (Min) (V)
- 9.6
- Load (Min) (ohms)
- 4
- Output power (W)
- 3.1
- THD + N @ 1 kHz (%)
- 0.08
- Iq (Typ) (mA)
- 9
- Control interface
- Hardware
- Closed/open loop
- Closed
- Analog supply (Min) (V)
- 9.6
- Analog supply (Max) (V)
- 16
- PSRR (dB)
- 89
- Operating temperature range (C)
- -40 to 85
LM4952的完整型号有:LM4952TS/NOPB、LM4952TSX/NOPB,以下是这些产品的关键参数及官网采购报价:
LM4952TS/NOPB,工作温度:-40 to 85,封装:DDPAK/TO-263 (KTW)-9,包装数量MPQ:45个,MSL 等级/回流焊峰值温度:Level-3-245C-168 HR,引脚镀层/焊球材料:SN,TI官网LM4952TS/NOPB的批量USD价格:1.469(1000+)
LM4952TSX/NOPB,工作温度:-40 to 85,封装:DDPAK/TO-263 (KTW)-9,包装数量MPQ:500个,MSL 等级/回流焊峰值温度:Level-3-245C-168 HR,引脚镀层/焊球材料:SN,TI官网LM4952TSX/NOPB的批量USD价格:1.224(1000+)
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)