The LM4990 is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1.25 watts of continuous average power to an 8? BTL load and 2 watts of continuous average power (NGZ and DGQ only) to a 4? BTL load with less than 1% distortion (THD+N+N) from a 5V_DC power supply.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4990 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement.

The LM4990 features a low-power consumption shutdown mode. To facilitate this, Shutdown may be enabled by either logic high or low depending on mode selection. Driving the shutdown mode pin either high or low enables the shutdown pin to be driven in a likewise manner to enable shutdown.

The LM4990 contains advanced pop & click circuitry which eliminates noise which would otherwise occur during turn-on and turn-off transitions.

The LM4990 is unity-gain stable and can be configured by external gain-setting resistors.

• Available in Space-Saving Packages: WSON, Exposed-DAP MSOP-PowerPAD, VSSOP, and DSBGA
• Ultra Low Current Shutdown Mode
• Improved Click and Pop Circuitry Eliminates Noise During Turn-On and Turn-Off Transitions
• 2.2 - 5.5V Operation
• No Output Coupling Capacitors, Snubber Networks or Bootstrap Capacitors Required
• Unity-Gain Stable
• External Gain Configuration Capability
• User Selectable Shutdown High or Low Logic Level

Key Specifications

• Improved PSRR at 217Hz & 1KHz: 62dB
• Power Output at 5.0V, 1% THD+N,
  • 4? (NGZ and DGQ only): 2W (Typ)
• Power Output at 5.0V, 1% THD+N, 8?: 1.25W (Typ)
• Power Output at 3.0V, 1% THD+N, 4?: 600mW (Typ)
• Power Output at 3.0V, 1% THD+N, 8?: 425mW (Typ)
• Shutdown Current: 0.1μA (Typ)

All trademarks are the property of their respective owners.

• Audio input type
• Analog Input
• Architecture
• Class-AB
• Speaker channels (Max)
• Mono
• Power stage supply (Max) (V)
• 5.5
• Power stage supply (Min) (V)
• 2.2
• Load (Min) (ohms)
• 4
• Output power (W)
• 2
• THD + N @ 1 kHz (%)
• 0.2
• Iq (Typ) (mA)
• 4
• Control interface
• Hardware
• Closed/open loop
• Closed
• Analog supply (Min) (V)
• 2.2
• Analog supply (Max) (V)
• 5.5
• PSRR (dB)
• 64
• Operating temperature range (C)
• -40 to 85

LM4990的完整型号有：LM4990ITL/NOPB、LM4990ITLX/NOPB、LM4990MH/NOPB、LM4990MM/NOPB、LM4990MMX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM4990ITL/NOPB，工作温度：-40 to 85，封装：DSBGA (YZR)-9，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网LM4990ITL/NOPB的批量USD价格：.449（1000+）

LM4990ITLX/NOPB，工作温度：-40 to 85，封装：DSBGA (YZR)-9，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网LM4990ITLX/NOPB的批量USD价格：.374（1000+）

LM4990MH/NOPB，工作温度：-40 to 85，封装：HVSSOP (DGQ)-10，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LM4990MH/NOPB的批量USD价格：.374（1000+）

LM4990MM/NOPB，工作温度：-40 to 85，封装：VSSOP (DGK)-8，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM4990MM/NOPB的批量USD价格：.549（1000+）

LM4990MMX/NOPB，工作温度：-40 to 85，封装：VSSOP (DGK)-8，包装数量MPQ：3500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM4990MMX/NOPB的批量USD价格：.474（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)