The LM5005 high-voltage buck converter features all of the functions necessary to implement an efficient high-voltage switching regulator with a minimum number of external components. This easy-to-use converter operates over an input voltage range from 7 V to 75 V and delivers a maximum output current of 2.5 A. The control loop architecture is based upon current-mode control using an emulated current ramp for high noise immunity. Current-mode control provides inherent line feed-forward, cycle-by-cycle overcurrent protection and straightforward loop compensation. The use of an emulated control ramp reduces noise sensitivity of the PWM circuit, allowing reliable control of small duty cycles necessary in high input voltage applications.

The switching frequency is resistor-programmable from 50 kHz to 500 kHz. To reduce EMI, an oscillator synchronization pin allows multiple LM5005 regulators to self-synchronize or be synchronized to an external clock signal. Additional protection features include configurable soft start, external power supply tracking, thermal shutdown with automatic recovery, and remote shutdown capability.

The LM5005 is available in an 20-pin HTSSOP package with an exposed pad that is soldered to the PCB to achieve a low junction-to-board thermal impedance. To create a custom regulator design, use the LM5005 with WEBENCH^® Power Designer.

• High-Efficiency DC-DC Buck Converter
  • Wide Input Voltage Range From 7 V to 75 V
  • Adjustable Output Voltage as Low as 1.225 V
  • Output Current as High as 2.5 A
  • Junction Temperature Range –40°C to 125°C
• Integrated 75-V, 160-mΩ Buck MOSFET
• Meets EN55022 and CISPR 22 EMI Standards
• ±1.5% Feedback Voltage Accuracy
• Emulated Peak Current-Mode Control
  • Ultra-Fast Line and Load Transient Response
• Switching Frequency From 50 kHz to 500 kHz
• Master or Slave Frequency Synchronization Input
• 80-ns Minimum PWM ON Time For Low VOUT
• Monotonic Start-up into Prebiased Output
• Internal High-Voltage VCC Bias Supply Regulator
• Auxiliary Bias Supply Option to VCC
• Configurable Soft Start With Tracking
• Precision Standby and Shutdown Input
  • Programmable Input UVLO With Hysteresis
• Remote Shutdown and Standby Control
• Cycle-by-Cycle Overcurrent Protection
• VCC and Gate Drive UVLO Protection
• Thermal Shutdown Protection With Hysteresis
• Thermally-Enhanced 20-Pin HTSSOP Package

• Vin (Min) (V)
• 7
• Vin (Max) (V)
• 75
• Vout (Min) (V)
• 1.23
• Vout (Max) (V)
• 70
• Iout (Max) (A)
• 2.5
• Iq (Typ) (uA)
• 3000
• Switching frequency (Min) (kHz)
• 50
• Switching frequency (Max) (kHz)
• 500
• Features
• Enable, Frequency Synchronization, Over Current Protection
• Rating
• Catalog
• Regulated outputs (#)
• 1
• Control mode
• Current Mode
• Duty cycle (Max) (%)
• 99

LM5005的完整型号有：LM5005MH/NOPB、LM5005MHX/NOPB、LM5005MH，以下是这些产品的关键参数及官网采购报价：

LM5005MH/NOPB，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：73个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM5005MH/NOPB的批量USD价格：2.033（1000+）

LM5005MHX/NOPB，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM5005MHX/NOPB的批量USD价格：1.694（1000+）

LM5005MH，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：73个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNPB，TI官网LM5005MH的批量USD价格：2.71（1000+）

LM5005EVAL — 高电压 2.5A 降压稳压器评估模块

LM5005 High Voltage 2.5 Amp Buck Regulator

LM5005 PSpice Transient Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)