- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:交流/直流和隔离式直流/直流开关稳压器 - PWM 控制器
- 功能描述:具有 P 沟道钳位 FET 的 100V 双路交错式有源钳位电流模式控制器
- 点击这里打开及下载LM5034的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The LM5034 dual current mode PWM controller contains all the features needed to control either two independent forward/active clamp dc/dc converters or a single high current converter comprised of two interleaved power stages. The two controller channels operate 180° out of phase thereby reducing input ripple current. The LM5034 includes a startup regulator that operates over a wide input range up to 100V and compound (bipolar + CMOS) gate drivers that provide a robust 2.5A peak sink current. The adjustable dead-time of the active clamp gate drivers and adjustable maximum PWM duty cycle reduce stress on the primary side MOSFET switches. Additional features include programmable line under-voltage lockout, cycle-by-cycle current limit, hiccup mode fault operation with adjustable restart delay, PWM slope compensation, soft-start, and a 2 MHz capable oscillator with synchronization capability.
- Two Independent PWM Current Mode Controllers
- Integrated High Voltage Startup Regulator
- Compound 2.5A Main Output Gate Drivers
- Single Resistor Oscillator Setting to 2 MHz
- Synchronizable Oscillator
- Active Clamp Gate Driver for P-Channel MOSFETs
- Adjustable Gate Drive Overlap Time
- Programmable Maximum Duty Cycle
- Maximum Duty Cycle Fold-Back at High Line Voltage
- Adjustable Timer for Hiccup Mode Current Limiting
- Integrated Slope Compensation
- Adjustable Line Under-Voltage Lockout
- Independently Adjustable Soft-Start (Each Regulator)
- Direct Interface with Opto-Coupler Transistor
- Thermal Shutdown
All trademarks are the property of their respective owners.
- Topology
- Active-Clamp Forward,
- Duty cycle (Max) (%)
- 76
- Supply voltage (Max) (V)
- 15
- UVLO thresholds on/off (V)
- Programmable/1.25V
- Features
- Current Limiting, HV Start-up, Soft Start, Supports PFET Clamp, Synchronization Pin
- Operating temperature range (C)
- -40 to 125
- Rating
- Catalog
- Frequency (Max) (kHz)
- 2000
- Gate drive (Typ) (A)
- 2.5
LM5034的完整型号有:LM5034MTC/NOPB、LM5034MTCX/NOPB、LM5034MTC,以下是这些产品的关键参数及官网采购报价:
LM5034MTC/NOPB,工作温度:-40 to 125,封装:TSSOP (PW)-20,包装数量MPQ:73个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LM5034MTC/NOPB的批量USD价格:1.608(1000+)
LM5034MTCX/NOPB,工作温度:-40 to 125,封装:TSSOP (PW)-20,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LM5034MTCX/NOPB的批量USD价格:1.34(1000+)
LM5034MTC,工作温度:-40 to 125,封装:TSSOP (PW)-20,包装数量MPQ:73个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SNPB,TI官网LM5034MTC的批量USD价格:2.077(1000+)
LM5034EVAL — 具有有源钳位的高电压双路交错电流模式控制器
LM5034 High Voltage Dual Interleaved Current Mode Controller with Active Clamp