The LM5035B Half-Bridge Controller/Gate Driver contains all of the features necessary to implement half-bridge topology power converters using voltage mode control with line voltage feed-forward.

The LM5035B is a functional variant of the LM5035A half-bridge PWM controller. The LM5035B provides higher maximum duty cycle and higher start-up regulator output current than the LM5035A or LM5035. Also, the Synchronous Rectifier drive outputs of the LM5035B are held low in shutdown modes.

The LM5035, LM5035A, and LM5035B include a floating high-side gate driver, which is capable of operating with supply voltages up to 105V. Both the high-side and low-side gate drivers are capable of 2A peak. An internal high voltage startup regulator is included, along with programmable line undervoltage lockout (UVLO) and overvoltage protection (OVP). The oscillator is programmed with a single resistor to frequencies up to 2MHz. The oscillator can also be synchronized to an external clock. A current sense input and a programmable timer provide cycle-by-cycle current limit and adjustable hiccup mode overload protection.The differences between LM5035, LM5035A, LM5035B, and LM5035C are summarized in .

• 105V / 2A Half-Bridge Gate Drivers
• Synchronous Rectifier Control Outputs with Programmable Delays
• Synchronous Rectifiers Turned Off in Shutdown Modes.
• Reduced Deadtime Between High and Low Side Drive for Higher Maximum Duty Cycle.
• High Voltage (105V) Start-up Regulator
• Voltage mode Control with Line Feed-Forward and Volt Second Limiting
• Resistor Programmed, 2MHz Capable Oscillator
• Programmable Line Under-Voltage Lockout and Over-Voltage Protection
• Internal Thermal Shutdown Protection
• Adjustable Soft-Start
• Versatile Dual Mode Over-Current Protection with Hiccup Delay Timer
• Cycle-by-Cycle Over-Current Protection
• Direct Opto-coupler Interface
• 5V Reference Output

• TSSOP-20
• WQFN-24 (4mm x 5mm)

All trademarks are the property of their respective owners.

• Topology
• Half-Bridge
• Duty cycle (Max) (%)
• 50
• Supply voltage (Max) (V)
• 15
• UVLO thresholds on/off (V)
• Programmable/1.25V
• Features
• Current Limiting, HV Start-up, Multi-topology, Pre-Bias Start-Up, Synchronization Pin
• Operating temperature range (C)
• -40 to 125
• Rating
• Catalog
• Frequency (Max) (kHz)
• 2000
• Gate drive (Typ) (A)
• 2

LM5035B的完整型号有：LM5035BMH/NOPB、LM5035BMHX/NOPB、LM5035BSQ/NOPB、LM5035BSQX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM5035BMH/NOPB，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：73个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM5035BMH/NOPB的批量USD价格：1.885（1000+）

LM5035BMHX/NOPB，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM5035BMHX/NOPB的批量USD价格：1.571（1000+）

LM5035BSQ/NOPB，工作温度：-40 to 125，封装：WQFN (NHZ)-24，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM5035BSQ/NOPB的批量USD价格：1.885（1000+）

LM5035BSQX/NOPB，工作温度：-40 to 125，封装：WQFN (NHZ)-24，包装数量MPQ：4500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM5035BSQX/NOPB的批量USD价格：1.571（1000+）

LM5035CEVAL — 用于 LM5035C 的评估板

The LM5035C evaluation board is designed to provide the design engineer with a fully functional power converter based on the Half Bridge topology to evaluate the LM5035C controller. The LM5035C is a functional variant of the LM5035B Half-Bridge PWM Controller. The amplitude of the SR control (...)