- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:栅极驱动器 - 半桥驱动器
- 功能描述:具有 8V UVLO 和可编程延迟的 2A、100V 半桥栅极驱动器
- 点击这里打开及下载LM5102的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The LM5102 high-voltage gate driver is designed to drive both the high side and the low side N-Channel MOSFETs in a synchronous buck or a half bridge configuration. The floating high-side driver is capable of working with supply voltages up to 100 V. The outputs are independently controlled. The rising edge of each output can be independently delayed with a programming resistor. An integrated high voltage diode is provided to charge the high side gate drive bootstrap capacitor. A robust level shifter operates at high speed while consuming low power and providing clean level transitions from control logic to the high side gate driver. Undervoltage lockout is provided on both the low side and the high side power rails. This device is available in the standard VSSOP 10 pin and the WSON 10 pin packages.
For all available packages, see the orderable addendum at the end of the data sheet.- Drives Both a High-Side and Low-Side N-Channel MOSFET
- Independently Programmable High and Low Side Rising Edge Delay
- Bootstrap Supply Voltage Range up to 118 V dc
- Fast Turn-Off Propagation Delay (25 ns Typical)
- Drives 1000-pF Loads with 15-ns Rise and Fall Times
- Supply Rail Undervoltage Lockout
- Low Power Consumption
- Timer Can Be Terminated Midway Through Sequence
- Bus voltage (Max) (V)
- 100
- Power switch
- MOSFET
- Input VCC (Min) (V)
- 9
- Input VCC (Max) (V)
- 14
- Peak output current (A)
- 2
- Rise time (ns)
- 10
- Operating temperature range (C)
- -40 to 125
- Undervoltage lockout (Typ)
- 8
- Rating
- Catalog
- Number of channels (#)
- 2
- Fall time (ns)
- 10
- Prop delay (ns)
- 35
- Iq (uA)
- 10
- Input threshold
- TTL
- Channel input logic
- TTL
- Negative voltage handling at HS pin (V)
- -1
- Features
- —
- Driver configuration
- Dual, Independent
LM5102的完整型号有:LM5102MM/NOPB、LM5102MMX/NOPB、LM5102SD/NOPB、LM5102SDX/NOPB,以下是这些产品的关键参数及官网采购报价:
LM5102MM/NOPB,工作温度:-40 to 125,封装:VSSOP (DGS)-10,包装数量MPQ:1000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LM5102MM/NOPB的批量USD价格:.84(1000+)
LM5102MMX/NOPB,工作温度:-40 to 125,封装:VSSOP (DGS)-10,包装数量MPQ:3500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LM5102MMX/NOPB的批量USD价格:1.105(1000+)
LM5102SD/NOPB,工作温度:-40 to 125,封装:WSON (DPR)-10,包装数量MPQ:1000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LM5102SD/NOPB的批量USD价格:1.326(1000+)
LM5102SDX/NOPB,工作温度:-40 to 125,封装:WSON (DPR)-10,包装数量MPQ:4500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LM5102SDX/NOPB的批量USD价格:1.105(1000+)
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)