The LM8502 is a versatile LED driver suitable for multiple applications. It includes a 2MHz, fixed-frequency synchronous boost converter, 10 current sink LED outputs, 2 outputs for flash or haptic applications, ambient light sensing and PWM input.

The 10 current sink LED outputs offer individual current control through an I²C-compatible interface. Current can be accurately controlled with a full-scale setting and 8-bit current control. The LM8502 also enables LED control with group faders and lighting engines. Group faders enable single I²C register writes for multiple LED outputs with fading, whereas lighting engines with SRAM memory enable engine-driven lighting sequences. Each LED output can be powered either from V_OUT or an external voltage supply.

The flash function is capable of driving 2 LEDs, each having 600 mA maximum current, or a single LED up to a 1.2A maximum current. A hardware flash enable provides a direct interface to trigger the flash pulse. Dual TX inputs allow the flash to be synchronized with the RF power system to prevent excessive current draw from the system power supply. The LM8502 also offers LED thermal sensing as a safety procedure for flash and separate indicator LED.

The LM8502 has two inputs for Ambient Light Sensing — together with the PWM input they enable Dynamic Backlight Control. The LM8502 may also be used for haptic motor driving instead of flash. When the device is idle, featured Power-save mode and use of an external clock reduce current consumption significantly.

• 10 Programmable Low-Side Current Sinks with Flexible Powering from VOUT or External Voltage Source
• 1.2A Dual Flash LED Driver with Flash, Torch and Voltage modes
• Ambient Light Sensing Capability with Two Inputs
• Up to 4000:1 dimming ratio for LED outputs
• Flash LED Thermal Sensing and Current Scaleback
• Hardware Flash, Torch Enable and Dual Synchronization Inputs for RF Power Amplifier Pulse Events
• Haptic Feedback Motor Driver
• Two Lighting Engines for User-Defined Lighting Sequences with 48 * 16 Bits of SRAM Memory
• External Clock Pin for Power Save
• External PWM Control Capability Enabling for Example Dynamic Backlight Control
• Fast I2C-Compatible Interface
• General Purpose ADC for Measuring, i.e., LED Output Voltages
• Ultra-Small Solution Area < 32 mm2
• 30-Bump (2.42 x 2.77 mm x 0.6 mm) 0.4 Pitch DSBGA Package

• Number of channels (#)
• 12
• LED current per channel (mA)
• 25.5
• LED configuration
• Parallel
• Program memory
• Yes
• Programmable ramp control
• Yes
• Vin (Min) (V)
• 2.7
• Vin (Max) (V)
• 5.5
• Iout (Max) (A)
• 1.4
• Features
• I2C control
• Iq (Typ) (mA)
• 0.3
• Shutdown current (Typ) (uA)
• 0.3
• Operating temperature range (C)
• -30 to 85
• Rating
• Catalog

LM8502的完整型号有：LM8502TME/NOPB、LM8502TMX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM8502TME/NOPB，工作温度：-30 to 85，封装：DSBGA (YFQ)-30，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网LM8502TME/NOPB的批量USD价格：1.694（1000+）

LM8502TMX/NOPB，工作温度：-30 to 85，封装：DSBGA (YFQ)-30，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网LM8502TMX/NOPB的批量USD价格：1.412（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)