- 制造厂商:TI
- 产品类别:传感器
- 技术类目:温度传感器和控制 IC - 数字温度传感器
- 功能描述:具有 β 补偿、风扇控制、硬件和电源监控器、采用 TSSOP 封装的 ±2°C 四路远程和本地温度传感器
- 点击这里打开及下载LM94的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The LM94 hardware monitor has a two wire digital interface compatible with SMBus 2.0. Using a ΣΔ ADC, the LM94 measures the temperature of four remote diode connected transistors as well as its own die and 16 power supply voltages. The LM94 has new TruTherm technology that supports precision thermal diode measurements of processors on sub-micron processes.
Description (continued)
To set fan speed, the LM94 has two PWM outputs that are each controlled by up to six temperature zones. The fan-control algorithm can be based on a lookup table, PI (proportional/integral) control loop, or a combination of both. The LM94 includes digital filters that can be invoked to smooth temperature readings for better control of fan speed such that acoustical noise is minimized. The LM94 has four tachometer inputs to measure fan speed. Limit and status registers for all measured values are included.
The LM94 builds upon the functionality of previous motherboard server management ASICs, such as the LM93. It also adds measurement and control support for dynamic Vccp monitoring for VRD10/11 and PROCHOT. It is designed to monitor a dual processor Xeon class motherboard with a minimum of external components.
- 8-bit ΣΔ ADC
- Monitors 16 Power Supplies
- Monitors 4 Remote Thermal Diodes and 2 LM60
- NewTruTherm Technology Support for Precision Thermal Diode Measurements
- Internal Ambient Temperature Sensing
- Programmable Autonomous Fan Control Based on Temperature Readings with Fan Boost Support
- Fan Boost Support on Tachometer Limit Error Event
- Fan Control Based on 13-step Lookup Table or PI Control Loop or Combination of Both
- PI Fan Control Loop Supports Tcontrol
- Temperature Reading Digital Filters
- 0.5°C digital Temperature Sensor Resolution
- 0.0625°C Filtered Temperature Resolution for Fan Control
- 2 PWM Fan Speed Control Outputs
- 4 Fan Tachometer Inputs
- Dual Processor Thermal Throttling (PROCHOT) Monitoring
- Dual Dynamic VID Monitoring (6/7 VIDs per processor) Supports VRD10.2/11
- 8 General Purpose I/Os:
- 4 Can be Configured as Fan tachometer Inputs
- 2 Can be Configured to Connect to Processor THERMTRIP
- 2 are Standard GPIOs that Could be Used to Monitor IERR Signal
- 2 General Purpose Inputs that Can be Used to Monitor the 7th VID Signal for VRD11
- Limit Register Comparisons of all Monitored Values
- 2-wire Serial Digital Interface, SMBus 2.0 Compliant
- Supports Byte/block Read and Write
- Selectable Slave Address (Tri-level Pin Selects 1 of 3 Possible Addresses)
- ALERT Output Supports Interrupt or Comparator Modes
- 2.5V Reference Voltage Output
- 56-pin TSSOP Package
- XOR-tree Test Mode
- Voltage Measurement Accuracy ... ±2% FS (max)
- Temperature Resolution ... 9-bits, 0.5°C
- Temperature Sensor Accuracy ... ±2.5 °C (max)
- Temperature Range:
- LM94 Operational ... 0°C to +85°C
- Remote Temp Accuracy ... 0°C to +125°C
- Power Supply Voltage ... +3.0V to +3.6V
- Power Supply Current ... 1.6 mA
All trademarks are the property of their respective owners.
- Local sensor accuracy (Max) (+/- C)
- 3
- Type
- Fan Controller
- Operating temperature range (C)
- 0 to 100
- Supply voltage (Min) (V)
- 3
- Interface type
- SMBus
- Supply voltage (Max) (V)
- 3.6
- Supply current (Max) (uA)
- 1600
- Temp resolution (Max) (bits)
- 8
- Features
- PWM output, Tachometer
- Remote channels (#)
- 4
- Addresses
- 3
- Rating
- Catalog
LM94的完整型号有:LM94CIMT/NOPB、LM94CIMTX/NOPB,以下是这些产品的关键参数及官网采购报价:
LM94CIMT/NOPB,工作温度:0 to 100,封装:TSSOP (DGG)-56,包装数量MPQ:34个,MSL 等级/回流焊峰值温度:Level-2-260C-1 YEAR,引脚镀层/焊球材料:SN,TI官网LM94CIMT/NOPB的批量USD价格:8.131(1000+)
LM94CIMTX/NOPB,工作温度:0 to 100,封装:TSSOP (DGG)-56,包装数量MPQ:1000个,MSL 等级/回流焊峰值温度:Level-2-260C-1 YEAR,引脚镀层/焊球材料:SN,TI官网LM94CIMTX/NOPB的批量USD价格:6.776(1000+)
LM93SW-LINUX — 用于 LM93 的 Linux 驱动程序
Linux 驱动程序支持 LM93 系列硬件监测计。Linux 驱动程序支持通过 I2C 总线进行通信,并可与硬件监控子系统交互。Linux 主线状态
在 Linux 主线中提供:是
可通过 git.ti.com 获取:不适用
- lm93
- lm94
与该器件关联的文件为:
drivers/hwmon/lm93.c
其他文件Documentation/hwmon/lm93
启用驱动程序支持 使用“make menuconfig”(也可以使用“make (...)