- 制造厂商：TI
- 产品类别：传感器
- 技术类目：温度传感器和控制 IC - 数字温度传感器
- 功能描述：具有 SensorPath 接口的 ±2°C 温度传感器
- 点击这里打开及下载LM95010的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The LM95010 is a digital output temperature sensor that has single-wire interface compatible with the SensorPath interface. It uses a ΔVbe analog temperature sensing technique that generates a differential voltage that is proportional to temperature. This voltage is digitized using a Sigma-Delta analog-to-digital converter. The LM95010 is part of a hardware monitor system, comprised of two parts: the PC System Health Controller (Master), such as a Super I/O, and up to seven slaves of which four can be LM95010s. Using SensorPath, the LM95010 will be controlled by the master and report to the master its own die temperature. SensorPath data is pulse width encoded, thereby allowing the LM95010 to be easily connected to many general purpose micro-controllers.
- SensorPath Bus
- 4 Hardware Programmable Addresses
- Temperature Sensing
- 0.25 °C Resolution
- 127.75 °C Maximum Temperature Reading
- 8-Lead VSSOP Package
- Temperature Sensor Accuracy ±2°C (max)
- Temperature Range ?20 to +125°C
- Power Supply Voltage +3.0 to +3.6 V
- Power Supply Current 0.5 mA (typ)
- Conversion Time 14 to 1456 ms
All trademarks are the property of their respective owners.
- Local sensor accuracy (Max) (+/- C)
- 2
- Type
- Local
- Operating temperature range (C)
- -20 to 125
- Supply voltage (Min) (V)
- 3
- Interface type
- 1-wire Sensor Path
- Supply voltage (Max) (V)
- 3.6
- Supply current (Max) (uA)
- 750
- Temp resolution (Max) (bits)
- 10
- Remote channels (#)
- 0
- Addresses
- 4
- Rating
- Catalog
LM95010的完整型号有：LM95010CIMM/NOPB，以下是这些产品的关键参数及官网采购报价：
LM95010CIMM/NOPB，工作温度：-20 to 125，封装：VSSOP (DGK)-8，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM95010CIMM/NOPB的批量USD价格：.827（1000+）
DIGITALTEMPSENSORSEVM-SW — 用于硬件监控器和数字温度传感器的评估板软件
Evaluation Board Software for Hardware Monitors and Digital Temperature SensorsSENSOREVAL — 用于硬件监控器和数字温度传感器的评估板软件
SensorEvalSensorEval 软件支持通过 USB 接口连接的 TI 最新温度传感器和硬件监控器评估板。此外，该软件还允许访问直接安装在支持 Intel 芯片组的主板上的传感器。
- 下载 SensorEval 软件和手册
- 为以下各项提供 Windows XP 支持：
- USB 评估板（LM93 除外）
- Intel ICHx 接口（ADCS9888、LM32、LM40、LM41、LM71、LM95010 和 LM95071 除外）
- “无硬件”模式支持在没有任何硬件的情况下运行软件
