The LM98620 is a fully integrated, 10–Bit, 70 MSPS signal processing solution for high performance digital color copiers, scanners, and other image processing applications. High-speed signal throughput is achieved with an innovative six channel architecture utilizing Correlated Double Sampling (CDS), or Sample and Hold (SH) type sampling. Gain settings of 1x or 2x are available in the CDS/SH input stage. Each channel has a dedicated 1x to 10x (8 bit) PGA that allows accurate gain adjustment. The Digital White Level auto calibration loop can automatically set the PGA value to achieve a selected white target level. Each channel also has a ±4 bit coarse and ±10 bit fine analog offset correction DAC that allows offset correction before the sample-and-hold amplifier. These correction values can be controlled by an automated Digital Black Level correction loop. The PGA and offset DACs for each channel are programmed independently allowing unique values of gain and offset for each of the six channels. A 2-to-1 multiplexing scheme routes the signals to three 70 MHz high performance ADCs. The fully differential processing channels achieve exceptional noise immunity, having a very low noise floor of –68.5dB. The 10 bit analog-to-digital converters have excellent dynamic performance, making the LM98620 transparent in the image reproduction chain.

• 3.3 V Single Supply Operation
• CDS or S/H Processing
• 35 MHz Channel Rate
• Enhanced ESD Protection on Timing, Control and LVDS Pins
• Low Power CMOS Design
• 12 Terminal to 16 Terminal (Selectable) LVDS Serialized Data Output
• 4–Wire Serial Interface
• 2 Channel Symmetrical Architecture
• Independent Gain and Offset Correction for Each Channel
• Digital Black Level Calibration for Each Channel
• Digital White Level Calibration for Each Channel
• Programmable Input Clamp
• Key Specifications
  • Maximum Input Level:
    • 1.2 Vp–p (CDS Gain = 1.0)
    • 0.58 Vp–p (CDS Gain = 2.1)
  • Input Sample Rate:
    • 5 to 35 MSPS – 6ch mode
    • 10 to 35 MSPS – 3ch mode
  • PGA Gain Range: 1x to 10x (0 to 20 dB)
  • CDS/SH Gain Settings: 1x or 2.1x
  • Total Channel Gain: 1x to 21x (0 to 26 dB)
  • PGA Gain Resolution: 8 bits – Analog
  • ADC Resolution: 10 bits
  • ADC Sampling Rate: 10 to 70 MSPS
  • SNR: 68.5 dB (Gain = 1x)
  • Offset DAC Range:
    • ±111 mV or ±59.5 mV – FDAC
    • ±281 mV – CDAC
  • Offset DAC Resolution:
    • ±10 bits – FDAC
    • ±4 bits – CDAC
  • Supply Voltage: 3.0 V to 3.6 V
  • Power Dissipation: 1.02 W (typical)

• Resolution (Bits)
• 10
• Number of channels (#)
• 6
• Samples/sec (MSPS)
• 70
• Supply voltage (Max)
• 3.3
• Operating temperature range (C)
• 0 to 70
• Output data format
• LVDS

LM98620的完整型号有：LM98620VHB/NOPB，以下是这些产品的关键参数及官网采购报价：

LM98620VHB/NOPB，工作温度：0 to 70，封装：TQFP (PFC)-80，包装数量MPQ：119个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网LM98620VHB/NOPB的批量USD价格：11（1000+）

LM98620 IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)