The LMC567 device is a low-power, general-purpose LMCMOS tone decoder which is functionally similar to the industry standard LM567. The device consists of a twice frequency voltage-controlled oscillator (VCO) and quadrature dividers which establish the reference signals for phase and amplitude detectors.

The phase detector and VCO form a phase-locked loop (PLL) which locks to an input signal frequency which is within the control range of the VCO. When the PLL is locked and the input signal amplitude exceeds an internally pre-set threshold, a switch to ground is activated on the output pin. External components set up the oscillator to run at twice the input frequency and determine the phase and amplitude filter time constants.

• Functionally Similar to LM567
• 2-V to 9-V Supply Voltage Range
• Low Supply Current Drain
• No Increase in Current With Output Activated
• Operates to 500-kHz Input Frequency
• High Oscillator Stability
• Ground-Referenced Input
• Hysteresis Added to Amplitude Comparator
• Out-of-Band Signals and Noise Rejected
• 20-mA Output Current Capability

• Operating temperature range (C)
• -25 to 100
• Rating
• Catalog

LMC567的完整型号有：LMC567CMX/NOPB，以下是这些产品的关键参数及官网采购报价：

LMC567CMX/NOPB，工作温度：-25 to 100，封装：SOIC (D)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LMC567CMX/NOPB的批量USD价格：0.716（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)