The LMH0341/0041/0071/0051 SDI Deserializers are part of TI’s family of FPGA-Attach SER/DES products supporting 5-bit LVDS interfaces with FPGAs. When paired with a host FPGA the LMH0341 automatically detects the incoming data rate and decodes the raw 5-bit data words compliant to any of the following standards: DVB-ASI, SMPTE 259M, SMPTE 292M, or SMPTE 424M. See for details on which Standards are supported per device.

The interface between the LMH0341 and the host FPGA consists of a 5-bit wide LVDS bus, an LVDS clock and an SMBus interface. No external VCOs or clocks are required. The LMH0341 CDR detects the frequency from the incoming data stream, generates a clean clock and transmits both clock and data to the host FPGA. The LMH0341, LMH0041 and LMH0071 include a serial reclocked loopthrough with integrated SMPTE compliant cable driver. Refer to for a complete listing of single channel deserializers offered in this family.

The FPGA-Attach SER/DES product family is supported by a suite of IP which allows the design engineer to quickly develop video applications using the SER/DES products. The product is packaged in a physically small 48 pin WQFN package.

• 5-Bit LVDS Interface
• No External VCO or Clock Required
• Reclocked Serial Loopthrough With Cable Driver
• Powerdown Mode
• 3.3V SMBus Configuration Interface
• Small 48-Pin WQFN Package
• Industrial Temperature range: -40°C to +85°C

Key Specifications

• Output compliant with SMPTE 259M-C, SMPTE 292M, SMPTE 424M and DVB-ASI
• Typical power dissipation: 590 mW (loopthrough disabled, 3G datarate)
• 0.6 UI Minimum Input Jitter Tolerance

All trademarks are the property of their respective owners. TRI-STATE is a trademark of Texas Instruments.

• Function
• Deserializer
• Power consumption (mW)
• 520
• Data rate (Max) (Gbps)
• 2.97
• Control interface
• Pin/SMBus
• Operating temperature range (C)
• -40 to 85

LMH0341的完整型号有：LMH0341SQ/NOPB、LMH0341SQE/NOPB、LMH0341SQX/NOPB，以下是这些产品的关键参数及官网采购报价：

LMH0341SQ/NOPB，工作温度：-40 to 85，封装：WQFN (RHS)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LMH0341SQ/NOPB的批量USD价格：18.324（1000+）

LMH0341SQE/NOPB，工作温度：-40 to 85，封装：WQFN (RHS)-48，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LMH0341SQE/NOPB的批量USD价格：18.324（1000+）

LMH0341SQX/NOPB，工作温度：-40 to 85，封装：WQFN (RHS)-48，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LMH0341SQX/NOPB的批量USD价格：16.324（1000+）

BROADCAST_VIDEO_SERDES_IP — 用于 LVDS 接口 SDI 串行器/解串器的广播视频支持代码

We havedeveloped a family of serializers and deserializers intended to support the serial digital interface (SDI) standards of the Society of Motion Picture and Television Engineers (SMPTE). These devices connect to a host FPGA through a moderate speed, moderate width (600 Mbps, 5 bits wide) (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)