The LMK03000 family of precision clock conditioners combine the functions of jitter cleaning/reconditioning, multiplication, and distribution of a reference clock. The devices integrate a Voltage Controlled Oscillator (VCO), a high performance Integer-N Phase Locked Loop (PLL), a partially integrated loop filter, and up to eight outputs in various LVDS and LVPECL combinations.

The VCO output is optionally accessible on the Fout port. Internally, the VCO output goes through a VCO Divider to feed the various clock distribution blocks.

Each clock distribution block includes a programmable divider, a phase synchronization circuit, a programmable delay, a clock output mux, and an LVDS or LVPECL output buffer. This allows multiple integer-related and phase-adjusted copies of the reference to be distributed to eight system components.

The clock conditioners come in a 48-pin WQFN package and are footprint compatible with other clocking devices in the same family.

• Integrated VCO with Very Low Phase Noise Floor
• Integrated Integer-N PLL with Outstanding Normalized Phase Noise Contribution of -224 dBc/Hz
• VCO Divider Values of 2 to 8 (All Divides)
• Channel Divider Values of 1, 2 to 510 (even divides)
• LVDS and LVPECL Clock Outputs
• Partially Integrated Loop Filter
• Dedicated Divider and Delay Blocks on Each Clock Output
• Pin Compatible Family of Clocking Devices
• 3.15 to 3.45 V Operation
• Package: 48 Pin WQFN (7.0 x 7.0 x 0.8 mm)
• 200 fs RMS Clock Generator Performance (10 Hz to 20 MHz) with a Clean Input Clock

All trademarks are the property of their respective owners.

• Function
• Clock generator
• Number of outputs
• 9
• Output frequency (Max) (MHz)
• 1296
• Core supply voltage (V)
• 3.3
• Output supply voltage (V)
• 3.3
• Input type
• LVPECL
• Output type
• LVDS
• Operating temperature range (C)
• -40 to 85
• Features
• Integrated VCO, uWire
• Rating
• Catalog

LMK03033的完整型号有：LMK03033CISQ/NOPB、LMK03033CISQE/NOPB、LMK03033CISQX/NOPB、LMK03033ISQ/NOPB、LMK03033ISQE/NOPB、LMK03033ISQX/NOPB，以下是这些产品的关键参数及官网采购报价：

LMK03033CISQ/NOPB，工作温度：-40 to 85，封装：WQFN (RHS)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LMK03033CISQ/NOPB的批量USD价格：15.4（1000+）

LMK03033CISQE/NOPB，工作温度：-40 to 85，封装：WQFN (RHS)-48，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LMK03033CISQE/NOPB的批量USD价格：15.4（1000+）

LMK03033CISQX/NOPB，工作温度：-40 to 85，封装：WQFN (RHS)-48，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LMK03033CISQX/NOPB的批量USD价格：13.64（1000+）

LMK03033ISQ/NOPB，工作温度：-40 to 85，封装：WQFN (RHS)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LMK03033ISQ/NOPB的批量USD价格：14.08（1000+）

LMK03033ISQE/NOPB，工作温度：-40 to 85，封装：WQFN (RHS)-48，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LMK03033ISQE/NOPB的批量USD价格：14.08（1000+）

LMK03033ISQX/NOPB，工作温度：-40 to 85，封装：WQFN (RHS)-48，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LMK03033ISQX/NOPB的批量USD价格：12.32（1000+）

LMK03033CEVAL — 具有集成 VCO (1843 - 2160 MHz) 的精密时钟调节器

The LMK03033C Evaluation Board simplifies evaluation of the LMK03033C Precision Clock Conditioner with Integrated VCO. The package consists of an Evaluation Board, Evaluation Board Instructions, and a cable for programming the device through a PC parallel port. Code-Loader is the software used to (...)

CLOCKDESIGNTOOL — 时钟设计工具 - 环路滤波器和器件配置 + 仿真

The Clock Design Tool software helps with part selection, loop filter design and simulation of timing device solutions. When you enter desired output frequencies and a reference frequency (optional), the tool provides TI devices to meet the specified requirements, divider values and a recommended (...)

CODELOADER — CodeLoader 器件寄存器编程

The CodeLoader 4 software is used to program the LMX PLLs and LMK timing devices through either the USB or line print terminal (LPT) port of a computer. This software also provides information on how to program the device by showing the bits that are actually sent.

Which software do I use?

Product

(...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

CLOCK-TREE-ARCHITECT — 时钟树架构编程软件

时钟树架构是一款时钟树综合工具，可根据您的系统要求生成时钟树解决方案，从而帮助您简化设计流程。该工具从庞大的时钟产品数据库中提取数据，然后生成系统级多芯片时钟解决方案。