LMP92018 is a complete analog monitoring and control circuit which integrates an eight channel 10-bit Analog-to-Digital Converter (ADC), four 10-bit Digital-to-Analog Converters (DACs), an internal reference, an internal temperature sensor, a12-bit GPIO port, and a 10MHz SPI interface.

The eight channels of the ADC can be used to monitor rail voltages, current sense amplifier outputs, health monitors or sensors while the four DACs can be used to control PA (Power Amplifier) bias points, control actuators, potentiometers, etc.

Both the ADC and DACs can use either the internal 2.5V reference or an external reference independently allowing for flexibility in system design.

The built-in digital temperature sensor enables accurate (±2.5°C) local temperature measurement whose value is captured in the user accessible register.

The LMP92018 also includes a 12-bit GPIO port which allows for the resources of the microcontroller to be further extended, thus providing even more flexibility and reducing the number of signal interfacing to the microcontroller.

Both the GPIO port and the SPI compatible interface have independent supply pins enabling the LMP92018 to interface with low voltage microcontrollers.

The LMP92018 is available in a space saving 36-pin WQFN package and is specified over the full -30°C to +85°C temperature range.

• 8 ANALOG VOLTAGE MONITORING CHANNELS
  • 10-Bit ADC with Programmable Input MUX
  • Internal/External Reference
  • Tolerates High-Source Impedance at Lower Sampling Rates
• 4 PROGRAMMABLE ANALOG VOLTAGE OUTPUTS
  • Four 10-Bit DACs
  • Internal/External Reference
  • Drives Loads up to 1nF
• VOLTAGE REFERENCE
  • User-Selectable Source: External or Internal
  • Internal Reference 2.5V
• TEMPERATURE SENSOR
  • ±2.5°C Accuracy
• 12-BIT GPIO PORT
  • Each Bit Individually Programmable
  • User-Selectable Rail
• SPI-COMPATIBLE BUS
  • User-Selectable Rail

All trademarks are the property of their respective owners.

• Number of ADC channels
• 8
• ADC resolution (bits)
• 10
• Number of DAC channels (#)
• 4
• DAC: resolution (Bits)
• 10
• Temperature sensing
• Local
• GPIOs
• 12
• Interface type
• SPI
• Features
• —
• Operating temperature range (C)
• -40 to 125
• Rating
• Catalog
• ADC: sampling rate (KSPS)
• 500
• ADC: analog input range (Min) (V)
• 0
• ADC: analog input range (Max) (V)
• 5
• DAC: settling time (uS)
• 20
• DAC: output full scale (Min) (V)
• 0
• DAC: output full scale (Max) (V)
• 5

LMP92018的完整型号有：LMP92018SQ/NOPB、LMP92018SQE/NOPB、LMP92018SQX/NOPB，以下是这些产品的关键参数及官网采购报价：

LMP92018SQ/NOPB，工作温度：-40 to 125，封装： (NJK)-36，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LMP92018SQ/NOPB的批量USD价格：4.788（1000+）

LMP92018SQE/NOPB，工作温度：-40 to 125，封装： (NJK)-36，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LMP92018SQE/NOPB的批量USD价格：4.788（1000+）

LMP92018SQX/NOPB，工作温度：-40 to 125，封装： (NJK)-36，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网LMP92018SQX/NOPB的批量USD价格：3.99（1000+）

LMP92018 IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)