- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:线性和低压降 (LDO) 稳压器
- 功能描述:具有使能功能的 1A、高 PSRR、超低压降稳压器
- 点击这里打开及下载LP38869的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The LP38869 low-dropout linear regulator operates with an input voltage supply from +2.7V to +5.5V input, and delivers a specified 1A load current with a low 200 mV dropout. The high 50 dB PSRR at 100 kHz results from a high gain control loop that also yields excellent transient response. Coupled with a high accuracy output voltage, ±0.75 % over temperature, the LP38869 is an ideal power supply for FPGAs, DSPs or MCUs. Output voltage is preset at +2.5V, or may be adjustable between +0.8V to +5V with an external resistor divider.
The LP38869 only needs 1 μF output capacitance for stability. The FlexCap compensation allows the use of any type of output capacitor, regardless of ESR. Other features include: Soft-Start; delayed reset output; low-power shutdown; short-circuit protection; and thermal shutdown protection
Ground Pin Current: Typically less than 1 mA at 1A load
Shutdown Mode: Typically 2 µA quiescent current when the SHDN pin is pulled low.
Simplified Compensation: Stable with any type of output capacitor.
- Operating Input Supply Range: +2.7V to + 5.5V
- Maximum Continuous Output Current: 1A
- Preset Output Voltage of 2.5V, or Adjustable Output Voltage From 0.8V to 5.0V
- Pre-Set Output Initial VOUT Tolerance ±0.5%
- Adjustable VREF Tolerance of ±0.75%
- PSRR of 50dB at 100kHz
- Low 200 mV Dropout at 1A
- Typical 2 μA Supply Current in Shutdown Mode
- Adjustable Soft-Start for Output Current
- Fold-Back Output Current Limit
- Stable With Ceramic, Tantalum, or Aluminum Capacitors
- Stable With 1uF Input/Output Capacitors
- Thermal Shutdown
- 16-pin HTSSOP Package
All trademarks are the property of their respective owners.
- Output options
- Fixed Output
- Iout (Max) (A)
- 1
- Vin (Max) (V)
- 5.5
- Vin (Min) (V)
- 2.7
- Vout (Max) (V)
- 2.5
- Vout (Min) (V)
- 2.5
- Fixed output options (V)
- 2.5
- Noise (uVrms)
- 50
- Iq (Typ) (mA)
- 0.6
- Thermal resistance θJA (°C/W)
- 141
- Rating
- Catalog
- Load capacitance (Min) (μF)
- 1
- Regulated outputs (#)
- 1
- Features
- Enable, Soft start
- Accuracy (%)
- 2
- PSRR @ 100 KHz (dB)
- 50
- Dropout voltage (Vdo) (Typ) (mV)
- 200
- Operating temperature range (C)
- -40 to 125
LP38869的完整型号有:LP38869MH/NOPB、LP38869MHE/NOPB、LP38869MHX/NOPB,以下是这些产品的关键参数及官网采购报价:
LP38869MH/NOPB,工作温度:-40 to 125,封装:HTSSOP (PWP)-16,包装数量MPQ:92个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LP38869MH/NOPB的批量USD价格:1.195(1000+)
LP38869MHE/NOPB,工作温度:-40 to 125,封装:HTSSOP (PWP)-16,包装数量MPQ:250个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LP38869MHE/NOPB的批量USD价格:1.195(1000+)
LP38869MHX/NOPB,工作温度:-40 to 125,封装:HTSSOP (PWP)-16,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LP38869MHX/NOPB的批量USD价格:0.996(1000+)
LP38869MH/NOPB,工作温度:-40 to 125,封装:HTSSOP (PWP)-16,包装数量MPQ:92个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LP38869MH/NOPB的批量USD价格:1.195(1000+)
LP38869MHE/NOPB,工作温度:-40 to 125,封装:HTSSOP (PWP)-16,包装数量MPQ:250个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LP38869MHE/NOPB的批量USD价格:1.195(1000+)
LP38869MHX/NOPB,工作温度:-40 to 125,封装:HTSSOP (PWP)-16,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LP38869MHX/NOPB的批量USD价格:0.996(1000+)