- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:多通道 IC (PMIC)
- 功能描述:面向基于硬盘的便携式媒体播放器的电源管理 IC (PMIC)
- 点击这里打开及下载LP3910的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The LP3910 is a programmable system power management unit optimized for HDD-based portable media players. The device incorporates two low-dropout LDO voltage regulators, two integrated buck DC-DC converters with dynamic voltage scaling (DVS), one wide load-range buck-boost DC-DC converter with programmable output voltage, a 4-channel, 8-bit ADC, and a dual-source lithium-ion or lithium-polymer battery charger.
The LP3910 also incorporates some advanced battery management functions such as battery temperature measurement, reverse current blocking for USB, LED-charger status indication, thermally regulated internal power FETs, battery-voltage monitoring, overcurrent protection, and a 10-hour safety timer. The device is programmable through a 400-kHz I2C-compatible interface.
The LP3910 is available in a thermally-enhanced
6-mm × 6-mm × 0.8-mm 48-pin WQFN package.
- Two Low-Dropout Regulators With Programmable Output Voltages:
- LDO1 for General Purpose Applications
- LDO2 for Low-Noise Analog Applications
- Green and Red LED-Charger Status Drivers
- 4-Channel 8-Bit Dual Slope Analog-to-Digital (ADC) Converter
- 2 High-Efficiency DVS Buck Converters
- Wide Load Range Buck-Boost DC-DC Converter
- 400-kHz I2C-Compatible Interface
- Linear Constant-Current and Constant-Voltage Charger for Single-Cell Lithium-Ion Batteries
- USB and Adapter Charging
- System Power Supply Management
- Voltage and Thermal Supervisory Circuits
- Continuous Battery Voltage Monitoring
- Interrupt Request Output With 8 Sources
- 50-mΩ Battery Path Resistance
- 100-mA to 1000-mA Full-Rate Charge Current Using Wall Adapter
- Selectable 0.05C and 0.1C End-of-Charge (EOC) Current
- USB Current Limits of 100, 500, and 800 mA
- USB Pre-Qualification Current of 50 mA
- Selectable 4.1-V, 4.2-V or 4.38-V Battery-Termination Voltages
- 0.35% Battery-Termination Accuracy
- ±1 LSB INL/DNL on 8-Bit ADC
- Regulated outputs (#)
- 4
- Vin (Min) (V)
- 2.5
- Vin (Max) (V)
- 6
- Iout (Max) (A)
- 1
- Rating
- Catalog
- LDO
- 2
- Iq (Typ) (mA)
- 0.03
- Features
- Comm Control, Enable, Power Sequencing
- Shutdown current (ISD) (Typ) (uA)
- 30
- Switching frequency (Typ) (kHz)
- 2000
- Configurability
- Factory programmable, Software configurable
LP3910的完整型号有:LP3910SQ-AK/NOPB、LP3910SQ-AN/NOPB、LP3910SQX-AA/NOPB、LP3910SQX-AN/NOPB、LP3910SQX-AP/NOPB,以下是这些产品的关键参数及官网采购报价:
LP3910SQ-AK/NOPB,工作温度:PropertyValue,封装:WQFN (NJV)-48,包装数量MPQ:250个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LP3910SQ-AK/NOPB的批量USD价格:1.95(1000+)
LP3910SQ-AN/NOPB,工作温度:PropertyValue,封装:WQFN (NJV)-48,包装数量MPQ:250个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LP3910SQ-AN/NOPB的批量USD价格:2.34(1000+)
LP3910SQX-AA/NOPB,工作温度:-40 to 85,封装:WQFN (NJV)-48,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LP3910SQX-AA/NOPB的批量USD价格:1.95(1000+)
LP3910SQX-AN/NOPB,工作温度:PropertyValue,封装:WQFN (NJV)-48,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LP3910SQX-AN/NOPB的批量USD价格:1.95(1000+)
LP3910SQX-AP/NOPB,工作温度:PropertyValue,封装:WQFN (NJV)-48,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LP3910SQX-AP/NOPB的批量USD价格:1.95(1000+)
LP3910SQ-AK/NOPB,工作温度:PropertyValue,封装:WQFN (NJV)-48,包装数量MPQ:250个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LP3910SQ-AK/NOPB的批量USD价格:1.95(1000+)
LP3910SQ-AN/NOPB,工作温度:PropertyValue,封装:WQFN (NJV)-48,包装数量MPQ:250个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LP3910SQ-AN/NOPB的批量USD价格:2.34(1000+)
LP3910SQX-AA/NOPB,工作温度:-40 to 85,封装:WQFN (NJV)-48,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LP3910SQX-AA/NOPB的批量USD价格:1.95(1000+)
LP3910SQX-AN/NOPB,工作温度:PropertyValue,封装:WQFN (NJV)-48,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LP3910SQX-AN/NOPB的批量USD价格:1.95(1000+)
LP3910SQX-AP/NOPB,工作温度:PropertyValue,封装:WQFN (NJV)-48,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网LP3910SQX-AP/NOPB的批量USD价格:1.95(1000+)