- 制造厂商:TI
- 产品类别:微控制器 (MCU) 和处理器
- 技术类目:微控制器 (MCU) - MSP430 微控制器
- 功能描述:具有 60KB 闪存、2KB SRAM、16 位 Σ-Δ ADC、双通道 DAC、2 个运算放大器和 128 段 LCD 的 8MHz MCU
- 点击这里打开及下载MSP430FG479的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The Texas Instruments MSP430™ family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6 µs.
The MSP430FG47x is a microcontroller configuration with two 16-bit timers, a basic timer with a real-time clock, a high-performance 16-bit sigma-delta ADC, dual 12-bit DACs, two configurable operational amplifiers, two universal serial communication interface, 48 I/O pins, and a liquid crystal display driver.
For complete module descriptions, see the MSP430x4xx Family User’s Guide.
- Low supply-voltage range: 1.8 V to 3.6V
- Ultra-low power consumption
- Active mode: 262 μA at 1 MHz, 2.2 V
- Standby mode: 1.1 μA
- Off mode (RAM retention): 0.1 μA
- Five power-saving modes
- Wakeup from standby mode in less than 6μs
- 16-bit RISC architecture, extended memory, 125?ns instruction cycle time
- 16-bit sigma-delta analog-to-digital converter (ADC) with internal reference and five differential analog inputs
- Dual 12-bit digital-to-analog converters (DACs)
- Dual configurable operational amplifiers
- Dual configurable operational amplifiers
- 16-bit Timer_A with three capture/compare registers
- 16-bit Timer_B with seven capture/compare-with-shadow registers
- Two universal serial communication interfaces (USCIs)
- USCI_A0
- Enhanced UART supports automatic baud-rate detection
- IrDA encoder and decoder
- Synchronous SPI
- USCI_B0
- I2C
- Synchronous SPI
- USCI_A0
- Integrated LCD Driver With Contrast Control for Up to 128 Segments
- Brownout detector
- Basic timer with real-time clock (RTC) feature
- Supply Voltage Supervisor/Monitor With Programmable Level Detection
- On-Chip Comparator
- Serial onboard programming, programmable code protection by security fuse
- Bootloader
- Device Comparison summarizes the available family members
- MSP430FG477: 32KB+256bytesofflash, 2KBofRAM
- MSP430FG478: 48KB+256bytesofflash, 2KBofRAM
- MSP430FG479: 60KB+256bytesofflash, 2KBofRAM
- Available in 113-ball MicroStar Junior? BGA (ZQW), 113-ball nFBGA (ZCA), and 80-pin QFP (PN) packages (see Device Comparison)
- Non-volatile memory (kB)
- 60
- RAM (KB)
- 2
- ADC
- 16-bit Sigma Delta
- GPIO pins (#)
- 48
- Features
- Advanced sensing, DAC, LCD, OpAmp, Real-time clock
- UART
- 1
- USB
- No
- Number of I2Cs
- 1
- SPI
- 2
- Comparator channels (#)
- 2
MSP430FG479的完整型号有:MSP430FG479IPN、MSP430FG479IPNR、MSP430FG479IZCA、MSP430FG479IZCAR,以下是这些产品的关键参数及官网采购报价:
MSP430FG479IPN,工作温度:-40 to 85,封装:LQFP (PN)-80,包装数量MPQ:119个,MSL 等级/回流焊峰值温度:Level-3-260C-168 HR,引脚镀层/焊球材料:NIPDAU,TI官网MSP430FG479IPN的批量USD价格:8.64(1000+)
MSP430FG479IPNR,工作温度:-40 to 85,封装:LQFP (PN)-80,包装数量MPQ:1000个,MSL 等级/回流焊峰值温度:Level-3-260C-168 HR,引脚镀层/焊球材料:NIPDAU,TI官网MSP430FG479IPNR的批量USD价格:7.2(1000+)
MSP430FG479IZCA,工作温度:-40 to 85,封装:NFBGA (ZCA)-113,包装数量MPQ:260个,MSL 等级/回流焊峰值温度:Level-3-260C-168 HR,引脚镀层/焊球材料:SNAGCU,TI官网MSP430FG479IZCA的批量USD价格:8.64(1000+)
MSP430FG479IZCAR,工作温度:-40 to 85,封装:NFBGA (ZCA)-113,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-3-260C-168 HR,引脚镀层/焊球材料:SNAGCU,TI官网MSP430FG479IZCAR的批量USD价格:7.2(1000+)
MSP-TS430PN80 — MSP-TS430PN80 - 适用于 MSP430F2x 和 MSP430F4x MCU 的 80 引脚目标开发板
MSP-FET — MSP430 闪存仿真工具
MSP-GANG — MSP-GANG 生产编程器
MSP-GRLIB — MSP 图形库
MSP-DSPLIB — MSP 微控制器的数字信号处理 (DSP) 库
MSP430WARE — 适用于 MSP430 微控制器的 MSPWare
UNIFLASH — 适用于大多数 TI 微控制器 (MCU) 和毫米波传感器的 UniFlash
MSP-FLASHER — 适用于 MSP430 和 SimpleLink MSP432 MCU 的命令行编程器
CCSTUDIO — Code Composer Studio 集成式开发环境 (IDE)
MSP430F47x, MSP430FG47x Code Examples (Rev. I)
CCSTUDIO-MSP — 适用于 MSP 微控制器的 Code Composer Studio (CCS) 集成开发环境 (IDE)
ENERGYTRACE — EnergyTrace 技术
IAR-KICKSTART — IAR Embedded Workbench
MSP430 Op Amp (OA) Module SPICE/TINA Models
MSP-3P-SEARCH — MSP Third party search tool
MSP430 schematic symbols and footprints library for use with the Eagle CAD tool (Rev. E)