The Texas Instruments MSP430FR600x family of ultrasonic sensing and measurement SoCs are powerful, highly integrated microcontrollers (MCUs) that are optimized for water and heat meters. The MSP430FR600x MCUs offer an integrated ultrasonic sensing solution (USS) module, which provides high accuracy for a wide range of flow rates. The USS module helps achieve ultra-low-power metering combined with lower system cost due to maximum integration requiring very few external components. MSP430FR600x MCUs implement a high-speed ADC-based signal acquisition followed by optimized digital signal processing using the integrated low-energy accelerator (LEA) module to deliver a high-accuracy metering solution with ultra-low power optimum for battery-powered metering applications.

The USS module includes a programmable pulse generator (PPG) and a physical interface (PHY) with a low-impedance output driver for optimum sensor excitation to deliver best results for zero-flow drift (ZFD). The module also includes a programmable gain amplifier (PGA) and a high-speed 12-bit 8-Msps sigma-delta ADC (SDHS) for accurate signal acquisition from industry-standard ultrasonic transducers.

Additionally, MSP430FR600x MCUs integrate other peripherals to improve system integration for metering. The MSP430FR600x MCUs also have an on-chip 8-mux LCD driver, an RTC, a 12-bit SAR ADC, an analog comparator, an advanced encryption accelerator (AES256), and a cyclic redundancy check (CRC) module.

MSP430FR600x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get your design started quickly. Development kits include the MSP?TS430PZ100E 100-pin target development board and EVM430?FR6047 ultrasonic water flow meter EVM. TI also provides free software including the ultrasonic sensing design center, ultrasonic sensing software library, and MSP430Ware™ software.

TI’s MSP430 ultra-low-power (ULP) FRAM microcontroller platform combines uniquely embedded FRAM and a holistic ultra-low-power system architecture, letting system designers increase performance while lowering energy consumption. FRAM technology combines the low-energy fast writes, flexibility, and endurance of RAM with the nonvolatility of flash.

For complete module descriptions, see the MSP430FR58xx, MSP430FR59xx, and MSP430FR6xx Family User’s Guide .

• Best-in-class ultrasonic water-flow measurement with ultra-low power consumption
  • <100-ps differential time-of-flight (dTOF) accuracy
  • High-precision time measurement resolution of 20ps
  • Ability to detect low flow rates (4-6 liters per hour)
  • Approximately 4-μA current consumption with onemeasurement per second
• Compliant to and exceeds ISO 4064, OIML R49, and EN 1434 accuracy standards
• Ability to directly interface standard ultrasonic sensors (up to 2.5 MHz)
• Integrated analog front end – ultrasonic sensing solution (USS)
  • Programmable pulse generation (PPG) to generate pulses at different frequencies
  • Integrated physical interface (PHY) with low-impedance (4-Ω) output driver to control input and output channels
  • High-performance high-speed 12-bit sigma-delta ADC (SDHS) with output data rates up to 8Msps
  • Programmable gain amplifier (PGA) with –6.5dB to 30.8dB
  • High-performance phase-locked loop (PLL) with output range of 68MHz to 80MHz
• Low-energy accelerator (LEA)
  • Operation independent of CPU
  • 4KB of RAM shared with CPU
  • Efficient 256-point complex FFT: Up to 40× faster than Arm Cortex-M0+ core
• Embedded microcontroller
  • 16-bit RISC architecture up to 16?MHz clock
  • Wide supply voltage range from 3.6V down to 1.8V (minimum supply voltage is restricted by SVS levels, see the SVS specifications)
• Optimized ultra-low-power modes
  • Active mode: approximately 120 μA/MHz
  • Standby mode with real-time clock (RTC) (LPM3.5): 450 nA (1)
  • Shutdown (LPM4.5): 30 nA
• Ferroelectric random access memory (FRAM)
  • Up to 256KB of nonvolatile memory
  • Ultra-low-power writes
  • Fast write at 125 ns per word (64KB in 4ms)
  • Unified memory = program + data + storage in one space
  • 1015 write cycle endurance
  • Radiation resistant and nonmagnetic
• Intelligent digital peripherals
  • 32-bit hardware multiplier (MPY)
  • 6-channel internal DMA
  • RTC with calendar and alarm functions
  • Six 16-bit timers with up to seven capture/compare registers each
  • 32-bit and 16-bit cyclic redundancy check (CRC)
• High-performance analog
  • 16-channel analog comparator
  • 12-bit SAR ADC featuring window comparator, internal reference, and sample-and-hold, up to 16 external input channels
  • Integrated LCD driver with contrast control for up to 264 segments
• Multifunction input/output ports
  • Accessible bit-, byte-, and word-wise (in pairs)
  • Edge-selectable wake from LPM on all ports
  • Programmable pullup and pulldown on all ports
• Code security and encryption
  • 128- or 256-bit AES security encryption and decryption coprocessor
  • Random number seed for random number generation algorithms
  • IP encapsulation protects memory from external access
  • FRAM provides inherent security advantages
• Enhanced serial communication
  • Up to four eUSCI_A serial communication ports
    • UART with automatic baud-rate detection
    • IrDA encode and decode
  • Up to two eUSCI_B serial communication ports
    • I2C with multiple-slave addressing
  • Hardware UART or I2C bootloader (BSL)
• Flexible clock system
  • Fixed-frequency DCO with 10 selectable factory-trimmed frequencies
  • Low-power low-frequency internal clock source (VLO)
  • 32-kHz crystals (LFXT)
  • High-frequency crystals (HFXT)
• Development tools and software (also see Tools and Software)
  • Ultrasonic Sensing Design Center graphical user interface
  • Ultrasonic sensing software library
  • EVM430-FR6047 water meter evaluation module
  • MSP-TS430PZ100E target socket board for 100-pin package
  • Free professional development environments with EnergyTrace++ technology
  • MSP430Ware? for MSP430? microcontrollers
• Device Comparison summarizes the available device variants and package options

(1)The RTC is clocked by a 3.7-pF crystal.

• Non-volatile memory (kB)
• 256
• RAM (KB)
• 8
• ADC
• 12-bit SAR
• GPIO pins (#)
• 81
• Features
• Advanced sensing, DMA, LCD, Low-energy accelerator (LEA), Metering test interface (MTIF), Real-time clock
• UART
• 4
• USB
• No
• Number of I2Cs
• 2
• SPI
• 4
• Comparator channels (#)
• 16

MSP430FR6007的完整型号有：MSP430FR6007IPZ、MSP430FR6007IPZR，以下是这些产品的关键参数及官网采购报价：

MSP430FR6007IPZ，工作温度：-40 to 85，封装：LQFP (PZ)-100，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网MSP430FR6007IPZ的批量USD价格：7.56（1000+）

MSP430FR6007IPZR，工作温度：-40 to 85，封装：LQFP (PZ)-100，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网MSP430FR6007IPZR的批量USD价格：6.3（1000+）

EVM430-FR6047 — MSP430FR6047 超声波感应评估模块

EVM430-FR6047 评估套件是一款开发平台，可用于评估适用于超声波检测应用（如智能水表）的 MSP430FR6047 MCU 的性能。MSP430FR6047 MCU 是一款超低功耗器件，具有集成的超声波检测模拟前端 (USS)，可实现高精度超声波测量。该器件还包括用于优化信号处理的低耗能加速器 (LEA)，可帮助优化功耗，延长电池寿命。该 EVM 提供了一种灵活的解决方案，从而让工程师能够使用 MSP430FR6047 MCU 和各种传感器（范围从 50KHz 到 2.5MHz）快速进行评估和开发。该 EVM 能够利用板载 LCD 显示屏和适用于射频通信模块的连接器显示测量参数。

MSP-TS430PZ100E — 适用于 MSP430FR604x MCU 的目标开发板 - 100 引脚（不包括微控制器）

Note: This kit does not include MSP430 microcontroller samples. To sample the compatible devices, please visit the product page or select the related MCU after adding the tool to the TI Store cart: MSP430FR6047

The MSP-TS430PZ100E microcontroller development board is a standalone ZIF socket target (...)

AUWE-3P-FLOWSENSORPIPE — Ultrasonic Flow Sensors with Pipe

Audiowell 超声波流量传感器需要与 DN15、DN20 和 DN25 尺寸的黄铜或聚合物塑料管配合使用，从而在使用我们的 MSP430FR600x 超声波感应 MSP430™ 微控制器评估模块（特别是可用于开发水流量计的 EVM430-FR6047 和 EVM430-FR6043）时，为开发人员提供帮助。这些 Audiowell 超声波流量传感器需要与超声波设计中心提供的水流量计软件配合使用。通过结合使用这些工具，您可以快速开发支持多种流速的水流量计。

发件人： Audiowell Electronics (Guangdong) Co., Ltd.

MSP-FET — MSP430 闪存仿真工具

**MSP-FET 与 Code Composer Studio v6 及更高版本兼容**

MSP-FET 是一款强大的仿真开发工具（通常称为调试探针），可帮助用户在 MSP 低功耗微控制器 (MCU) 上快速开始应用开发。

创建 MCU 软件通常需要将生成的二进制程序下载到 MSP 器件中，以进行验证和调试。MSP-FET 在主机和目标 MSP 之间提供调试通信通道。此外，MSP-FET 还在计算机的 USB 接口和 MSP UART 之间提供反向通道 UART 连接。这就为 MSP 编程器提供了一种在 MSP 和运行在计算机上的终端之间进行串行通信的便利方法。它还支持使用 (...)

UNIFLASH — 适用于大多数 TI 微控制器 (MCU) 和毫米波传感器的 UniFlash

TI 与多家公司携手推出适用于 TI MSP 器件的各种解决方案和服务。这些公司可使用 MSP 器件加速您的量产流程。下载此搜索工具，快速浏览第三方详细信息，并寻找合适的第三方来满足您的需求。

合作伙伴来自不同的地区，他们为不同的应用提供解决方案，如模块、闪存编程和完整解决方案。您可以根据地区、产品或技术需求选择合适的第三方。

该工具分为两大类 - 应用及闪存编程解决方案和服务。

• 应用包括不同种类的硬件和软件解决方案，例如模块、完整解决方案或软件服务。
• 闪存编程解决方案包括来自不同国家/地区的编程服务提供商提供的服务。