The OPA2684 provides a new level of performance in low-power, wideband, current-feedback (CFB) amplifiers. This CFB_PLUS amplifier is among the first to use an internally closed-loop input buffer stage that enhances performance significantly over earlier low-power CFB amplifiers. While retaining the benefits of very low power operation, this new architecture provides many of the benefits of a more ideal CFB amplifier. The closed-loop input stage buffer gives a very low and linearized impedance path at the inverting input to sense the feedback error current. This improved inverting input impedance retains exceptional bandwidth to much higher gains and improves harmonic distortion over earlier solutions limited by inverting input linearity. Beyond simple high-gain applications, the OPA2684 CFB_PLUS amplifier permits the gain setting element to be set with considerable freedom from amplifier bandwidth interaction. This allows frequency response peaking elements to be added, multiple input inverting summing circuits to have greater bandwidth, and low-power line drivers to meet the demanding requirements of studio cameras and broadcast video.

The output capability of the OPA2684 also sets a new mark in performance for low-power, current-feedback amplifiers. Delivering a full ±4Vp-p swing on ±5V supplies, the OPA2684 also has the output current to support > ±3Vp-p into 50 loads. This minimal output headroom requirement is complemented by a similar 1.2V input stage headroom giving exceptional capability for single +5V operation.

The OPA2684’s low 3.4mA supply current is precisely trimmed at +25°C. This trim, along with low shift over temperature and supply voltage, gives a very robust design over a wide range of operating conditions.

• MINIMAL BANDWIDTH CHANGE VERSUS GAIN
• 170MHz BANDWIDTH AT G = +2
• > 120MHz BANDWIDTH TO GAIN > +10
• LOW DISTORTION: < –82dBc at 5MHz
• HIGH OUTPUT CURRENT: 120mA
• SINGLE +5V TO +12V SUPPLY OPERATION
• DUAL ±2.5 TO ±6.0V SUPPLY OPERATION
• LOW SUPPLY CURRENT: 3.4mA Total
• APPLICATIONS
  • SHORT-LOOP ADSL CO DRIVER
  • LOW-POWER BROADCAST VIDEO DRIVERS
  • DIFFERENTIAL EQUALIZING FILTERS
  • DIFFERENTIAL SAW FILTER POST AMPLIFIER
  • MULTICHANNEL SUMMING AMPLIFIERS
  • PROFESSIONAL CAMERAS
  • ADC INPUT DRIVERS

All trademarks are the property of their respective owners.

• Architecture
• Current FB
• Number of channels (#)
• 2
• Total supply voltage (Min) (+5V=5, +/-5V=10)
• 5
• Total supply voltage (Max) (+5V=5, +/-5V=10)
• 12
• GBW (Typ) (MHz)
• 210
• BW @ Acl (MHz)
• 210
• Acl, min spec gain (V/V)
• 1
• Slew rate (Typ) (V/us)
• 820
• Vn at flatband (Typ) (nV/rtHz)
• 3.7
• Vn at 1 kHz (Typ) (nV/rtHz)
• 3.7
• Iq per channel (Typ) (mA)
• 1.7
• Vos (offset voltage @ 25 C) (Max) (mV)
• 3.5
• Rail-to-rail
• No
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 125
• CMRR (Typ) (dB)
• 60
• Input bias current (Max) (pA)
• 10000000
• Offset drift (Typ) (uV/C)
• 12
• Output current (Typ) (mA)
• 120
• 2nd harmonic (dBc)
• 67
• 3rd harmonic (dBc)
• 70
• @ MHz
• 5

OPA2684的完整型号有：OPA2684ID、OPA2684IDCNT，以下是这些产品的关键参数及官网采购报价：

OPA2684ID，工作温度：-40 to 125，封装：SOIC (D)-8，包装数量MPQ：75个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网OPA2684ID的批量USD价格：2.611（1000+）

OPA2684IDCNT，工作温度：-40 to 125，封装：SOT-23 (DCN)-8，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网OPA2684IDCNT的批量USD价格：2.611（1000+）

DEM-OPA-SO-2A — Dual op amp evaluation module for SO-8 package

TheDEM-OPA-SO-2Ademonstration fixture helps designers evaluate the operation and performance of TI's dual, high speed, wideband operational amplifiers. This unpopulated PC board (PCB) is compatible with products offered in the 8-lead SOIC (D) package.

For more information on these types of op (...)

DEM-OPA-SOT-2A — Dual op amp evaluation module for SOT23-8 package

The DEM-OPA-SOT-2A demonstration fixture helps designers evaluate the operation and performance of TI's dual, high speed, wideband operational amplifiers. This unpopulated PC board (PCB) is compatible with products offered in the SOT23-8 (DCN) package.

OPA2684 TINA-TI Reference Design

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)

ANALOG-ENGINEER-CALC — 模拟工程师计算器

模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面，其中显示各种常见计算的列表（从使用反馈电阻器设置运算放大器增益到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件）。除了可用作单独的工具之外，该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。 lock = 需要出口许可（1分钟）

VOLT-DIVIDER-CALC — 分压器确定一组分压电阻

VOLT-DIVIDER-CALC quickly determines a set of resistors for a voltage divider. This KnowledgeBase Javascript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. This calculator can also be used to design non-inverting attentuation circuits.

(...)