The OPA3692 provides an easy–to–use, broadband fixed gain, triple buffer amplifier. Depending on the external connections, the internal resistor network may be used to provide either a fixed gain of +2 video buffer, or a gain of +1 or –1 voltage buffer. Operating on a very low 5.1mA/ch supply current, the OPA3692 offers a slew rate and output power normally associated with a much higher supply current. A new output stage architecture delivers high output current with minimal headroom and crossover distortion. This gives exceptional single–supply operation. Using a single +5V supply, the OPA3692 can deliver a 1V to 4V output swing with over 120mA drive current and > 200MHz bandwidth. This combination of features makes the OPA3692 an ideal RGB line driver or single–supply, triple Analog–to– Digital Converter (ADC) input driver.

The low 5.1mA/ch supply current of the OPA3692 is precisely trimmed at +25°C. This trim, along with low drift over temperature, ensures lower maximum supply current than competing products that report only a room temperature nominal supply current. System power can be further reduced by using the optional disable control pin. Leaving this disable pin open, or holding it HIGH, gives normal operation. If pulled LOW, the OPA3692 supply current drops to less than 150µA/ch while the output goes into a high–impedance state. This feature may be used for power savings.

• FLEXIBLE SUPPLY RANGE: +5V to +12V Single Supply ±2.5V to ±6V Dual Supplies
• INTERNALLY FIXED GAIN: +2 or ±1
• HIGH BANDWIDTH (G = +2): 225MHz
• LOW SUPPLY CURRENT: 5.1mA/ch
• LOW DISABLED CURRENT: 150μA/ch
• HIGH OUTPUT CURRENT: 190mA
• OUTPUT VOLTAGE SWING: ±4.0V
• IMPROVED HIGH–FREQUENCY PINOUT
• APPLICATIONS
  • RGB VIDEO LINE DRIVERS
  • MULTIPLE LINE VIDEO DAs
  • PORTABLE INSTRUMENTS
  • ADC BUFFERS
  • ACTIVE FILTERS
  • WIDEBAND DIFFERENTIAL RECEIVERS
  • IMPROVED UPGRADE TO OPA3682

All trademarks are the property of their respective owners

• Diff gain (%)
• 0.07
• Output current (Typ) (mA)
• 190
• Vs (Min) (V)
• 5
• Vs (Max) (V)
• 12
• Diff phase (deg)
• 0.02
• Operating temperature range (C)
• -40 to 85
• Rating
• Catalog

OPA3692的完整型号有：OPA3692ID、OPA3692IDBQR、OPA3692IDBQT，以下是这些产品的关键参数及官网采购报价：

OPA3692ID，工作温度：-40 to 85，封装：SOIC (D)-16，包装数量MPQ：40个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网OPA3692ID的批量USD价格：3.057（1000+）

OPA3692IDBQR，工作温度：-40 to 85，封装：SSOP (DBQ)-16，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网OPA3692IDBQR的批量USD价格：3.057（1000+）

OPA3692IDBQT，工作温度：-40 to 85，封装：SSOP (DBQ)-16，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网OPA3692IDBQT的批量USD价格：3.668（1000+）

DEM-OPA-SO-3A — Triple op amp evaluation module for SO-16 package

TheDEM-OPA-SO-3Ademonstration fixture helps designers evaluate the operation and performance of TI's triple, high speed, wideband operational amplifiers with disable. This unpopulated PC board (PCB) is compatible with products offered in the 16-lead SOIC (D) package with flow-through pin-out.

For (...)

DEM-OPA-SSOP-3A — Triple op amp evaluation module for SSOP-16 package

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)