The OPA3693 provides an easy to use, broadband, triple, fixed-gain buffer amplifier. Depending on the external connections, the internal resistor network may be used to provide either a fixed gain of +2 video buffer or a gain of +1 or –1 voltage buffer. The OPA3693 offers a slew rate (2500V/µs) and bandwidth
(> 800MHz) normally associated with a much higher supply current. A new output stage architecture delivers high output current with a minimal headroom and crossover distortion. This combination of features makes the OPA3693 an ideal RGB line driver or single-supply undersampling analog-to-digital converter (ADC) input driver.

The OPA3693 13mA/channel supply current is precisely trimmed at +25°C. This trim, along with a low temperature drift, gives lower system power over temperature. System power can be further reduced using the optional disable control pin. Leaving this pin open, or holding it HIGH, gives normal operation. If pulled LOW, the OPA3693 supply current drops to less than 130µA/channel. This power-saving feature, along with exceptional single +5V operation, make the OPA3693 ideal for portable applications. The OPA3693 is available in an SSOP-16 package.

• 650MHz BANDWIDTH (G = +2)
• FIXED GAIN OF ±1 or +2
• OUTPUT VOLTAGE SWING: ±4.1V
• ULTRA-HIGH SLEW RATE: 2500V/μs
• 3RD-ORDER INTERCEPT: > 40dBm (f < 50MHz)
• LOW POWER: 130mW/channel
• LOW DISABLED POWER: 0.4mW/channel
• APPLICATIONS
  • MULTIPLE LINE VIDEO DISTRIBUTION AMPLIFIER (DA)
  • PORTABLE INSTRUMENTS
  • BROADBAND VIDEO LINE DRIVERS
  • ADC BUFFERS
  • HIGH-FREQUENCY ACTIVE FILTERS

All other trademarks are the property of their respective owners.

• Diff gain (%)
• 0.03
• Output current (Typ) (mA)
• 100
• Vs (Min) (V)
• 2.2
• Vs (Max) (V)
• 6
• Diff phase (deg)
• 0.01
• Operating temperature range (C)
• -40 to 85
• Rating
• Catalog

OPA3693的完整型号有：OPA3693IDBQ、OPA3693IDBQR，以下是这些产品的关键参数及官网采购报价：

OPA3693IDBQ，工作温度：-40 to 85，封装：SSOP (DBQ)-16，包装数量MPQ：75个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网OPA3693IDBQ的批量USD价格：3.252（1000+）

OPA3693IDBQR，工作温度：PropertyValue，封装：SSOP (DBQ)-16，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网OPA3693IDBQR的批量USD价格：2.71（1000+）

DEM-OPA-SSOP-3C — Triple op amp evaluation module for SSOP-16 (flow-through pinout) package

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)