The Texas Instruments PCI2250 PCI-to-PCI bridge provides a high performance connection path between two peripheral component interconnect (PCI) buses. Transactions occur between masters on one PCI bus and targets on another PCI bus, and the PCI2250 allows bridged transactions to occur concurrently on both buses. The bridge supports burst-mode transfers to maximize data throughput, and the two bus traffic paths through the bridge act independently.

The PCI2250 bridge is compliant with the PCI Local Bus Specification, and can be used to overcome the electrical loading limits of 10 devices per PCI bus and one PCI device per expansion slot by creating hierarchical buses. The PCI2250 provides two-tier internal arbitration for up to four secondary bus masters and may be implemented with an external secondary PCI bus arbiter.

The PCI2250 provides compact-PCI (CPCI) hot-swap extended capability, which makes it an ideal solution for multifunction compact-PCI cards and adapting single function cards to hot-swap compliance.

The PCI2250 bridge is compliant with the PCI-to-PCI Bridge Specification. It can be configured for positive decoding or subtractive decoding on the primary interface, and provides several additional decode options that make it an ideal bridge to custom PCI applications. Two extension windows are included, and the PCI2250 provides decoding of serial and parallel port addresses.

The PCI2250 is compliant with PCI Power Management Interface Specification Revisions 1.0 and 1.1. Also, the PCI2250 offers PCI CLKRUN bridging support for low-power mobile and docking applications. The PCI2250 has been designed to lead the industry in power conservation. An advanced CMOS process is utilized to achieve low system power consumption while operating at PCI clock rates up to 33 MHz.

• Configurable for PCI Power Management Interface Specification Revision 1.0 or 1.1 support
• Compact-PCI friendly silicon as defined in the Compact-PCI Hot Swap Specification
• 3.3-V core logic with universal PCI interface compatible with 3.3-V and 5-V PCI signaling environments
• Two 32-bit, 33-MHz PCI buses
• Provides internal two-tier arbitration for up to four secondary bus masters and supports an external secondary bus arbiter
• Burst data transfers with pipeline architecture to maximize data throughput in both directions
• Provides programmable extension windows and port decode options
• Independent read and write buffers for each direction
• Provides five secondary PCI clock outputs
• Predictable latency per PCI Local Bus Specification
• Propagates bus locking
• Secondary bus is driven low during reset
• Provides VGA palette memory and I/O, and subtractive decoding options
• Advanced submicron, low-power CMOS technology
• Fully compliant with PCI-to-PCI Bridge Architecture Specification
• Packaged in 160-pin QFP (PCM) and 176-pin thin QFP (PGF)

• Type
• Bridge
• Protocols
• PCIe
• Applications
• PCIe
• Number of channels (#)
• 3
• Speed (Max) (Gbps)
• 0.033
• Supply voltage (V)
• 3.3, 5
• Rating
• Catalog
• Operating temperature range (C)
• 0 to 70

PCI2250的完整型号有：PCI2250PCM、PCI2250PCMG4、PCI2250PGF，以下是这些产品的关键参数及官网采购报价：

PCI2250PCM，工作温度：0 to 70，封装：QFP (PCM)-160，包装数量MPQ：24个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网PCI2250PCM的批量USD价格：7.715（1000+）

PCI2250PCMG4，工作温度：PropertyValue，封装：QFP (PCM)-160，包装数量MPQ：24个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网PCI2250PCMG4的批量USD价格：8.722（1000+）

PCI2250PGF，工作温度：0 to 70，封装：LQFP (PGF)-176，包装数量MPQ：40个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网PCI2250PGF的批量USD价格：7.715（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)